PO-101 APRS TX freq.

[BD4SMY]

This question is come from viewtopic.php?f=12&t=3940&start=4 by ec2ut.

I just have the same question and confrmed by setting APRS mode to PTT in the APRS options, but it is not resolved.
PO-101 APRS TX freq. is diplayed same as RX freq. I don't know how to display the correct one. Pls check.

[SA0BUX]

https://github.com/LibreDMR/OpenGD77_Us ... ata-screen

To select the Voice, APRS or Beacon fequency, press the keys 1, 2 or 3 respectively.

Note:

Keys 1, 2 and 3 currently only operate on this screen and not the Polar or other satellite screens.

[F1RMB]

The APRS Mode (from the Options submenu) has nothing to do with the Satellite's APRS.
Once in Satellite screen, APRS auto beaconing is disabled.
In Satellite screen, when you select the "APRS" mode, it uses APRS frequency from the keps, and you have to press PTT to xmit a beacon.

[BD4SMY]

To select the Voice, APRS or Beacon fequency, press the keys 1, 2 or 3 respectively.

This image which I had posted is just when I press the key 2 on the PO-101 frenquency screen.

PO-101 APRS.jpg (166.55 KiB) Viewed 784 times

After I set the TX2 (APRS) freq of PO-101 as 437.500 like EC2UT [viewtopic.php?f=12&t=3940&start=4], the above screen is displayed APRS TX freq as 145.900 (the same as RX freq), that is the bug / problem.

EC2UT.jpg (228.97 KiB) Viewed 784 times

The APRS Mode (from the Options submenu) has nothing to do with the Satellite's APRS.

Since VK3KYY [viewtopic.php?f=12&t=3940&start=7] said that APRS mode in APRS option, I just pay attention that and changed it.

VK3KYY.jpg (76.73 KiB) Viewed 784 times

[F1RMB]

I rechecked the code, PTT or Manual mode are supported.

[BD4SMY]

I rechecked the code, PTT or Manual mode are supported.

Could you please give me the detail setting step by step and give the successful screenshot image for me? thanks a lot.

I had use PTT mode, but also can't let the PO-101 APRS TX freq be changed to 437.5 Mhz.

[F1RMB]

About the frequency, I need to check the CPS first.

[F1RMB]

I've found a bug in the FW code about APRS TX Freq.

[F1RMB]

I rechecked the code, PTT or Manual mode are supported.

Could you please give me the detail setting step by step and give the successful screenshot image for me? thanks a lot.

I had use PTT mode, but also can't let the PO-101 APRS TX freq be changed to 437.5 Mhz.

Send me an email (address is available on QRZ.com), and tell me which build you need to test (DM-1701 or RT-84).

[BD4SMY]

Send me an email (address is available on QRZ.com), and tell me which build you need to test (DM-1701 or RT-84).

Since I'm not HAM MEMBER now, I can't see your email. Pls wait me to apply for that.