RT3S freezes when use SK2 + SELECT
RT3S freezes when use SK2 + SELECT
Hi, RT3S freezes when you use SK2 + SELECT to change Zones. When you reach the last Zone, if you turn the selector once more, then RT3S freezes, instead goes to the first Zone.
Re: RT3S freezes when use SK2 + SELECT
Please explain in more detail
I just tested
Green (to main menu)
Up / Down to Zone
Green to enter Zone menu
Up / Down to specific zone name
Now... Normally you just press Green to select the Zone.
Following your bug, I pressed SK2 + Green
And this still selects the Zone
What do you mean by "SELECT" as there is no button on the radio called SELECT
Do you mean the Green button
BTW.
I checked the User Guide and there is also no reference to a SELECT button
Re: RT3S freezes when use SK2 + SELECT
I think he is refering to SK2 + Rotary. That changes zone directly.
I have just tried it and it works fine here. So it sounds like a codeplug problem.
The special 'All channels' zone is the last to be selected so it could be there is a bad channel causing this.
Colin.
I have just tried it and it works fine here. So it sounds like a codeplug problem.
The special 'All channels' zone is the last to be selected so it could be there is a bad channel causing this.
Colin.
Re: RT3S freezes when use SK2 + SELECT
Hi, is the rotatory. In the doc appears as "SELECT"VK3KYY wrote: ↑Mon Jan 08, 2024 10:18 amPlease explain in more detail
I just tested
Green (to main menu)
Up / Down to Zone
Green to enter Zone menu
Up / Down to specific zone name
Now... Normally you just press Green to select the Zone.
Following your bug, I pressed SK2 + Green
And this still selects the Zone
What do you mean by "SELECT" as there is no button on the radio called SELECT
Do you mean the Green button
BTW.
I checked the User Guide and there is also no reference to a SELECT button
Re: RT3S freezes when use SK2 + SELECT
I programed it in a new codeplug. What can be wrong? The "All Channels" zone is working, appears the first and no crashG4EML wrote: ↑Mon Jan 08, 2024 11:13 amI think he is refering to SK2 + Rotary. That changes zone directly.
I have just tried it and it works fine here. So it sounds like a codeplug problem.
The special 'All channels' zone is the last to be selected so it could be there is a bad channel causing this.
Colin.
Re: RT3S freezes when use SK2 + SELECT
Reflaah it (the codeplug).
If the problem still exist afterwards, post it here.
If the problem still exist afterwards, post it here.
Re: RT3S freezes when use SK2 + SELECT
FYI
I already tested Rotary Control + SK2 to change Zone and that also worked fine for me
I suggest you also try using the Zone menu to select zone in turn
I already tested Rotary Control + SK2 to change Zone and that also worked fine for me
I suggest you also try using the Zone menu to select zone in turn
Re: RT3S freezes when use SK2 + SELECT
I reflash it and the same happens, I think that the problem is that in Zone option, if I open it and press up arrow, appears blank zones but in my codeplug there is not exists...
Re: RT3S freezes when use SK2 + SELECT
There is obviously some problem with your codeplug if the Zone names are not being displayed in the Zone list screen
Try exporting your codeplug to CSV and then import again, and see if the problem still exists.
Also, make sure you didn't use any special or accent characters in your zone names
Re: RT3S freezes when use SK2 + SELECT
How can I export it to csv?VK3KYY wrote: ↑Tue Jan 09, 2024 8:42 am
There is obviously some problem with your codeplug if the Zone names are not being displayed in the Zone list screen
Try exporting your codeplug to CSV and then import again, and see if the problem still exists.
Also, make sure you didn't use any special or accent characters in your zone names