RT3S freezes when use SK2 + SELECT

[EA5JOQ]

Hi, RT3S freezes when you use SK2 + SELECT to change Zones. When you reach the last Zone, if you turn the selector once more, then RT3S freezes, instead goes to the first Zone.

[VK3KYY]

Hi, RT3S freezes when you use SK2 + SELECT to change Zones. When you reach the last Zone, if you turn the selector once more, then RT3S freezes, instead goes to the first Zone.

Please explain in more detail

I just tested


Green (to main menu)
Up / Down to Zone
Green to enter Zone menu
Up / Down to specific zone name

Now... Normally you just press Green to select the Zone.

Following your bug, I pressed SK2 + Green

And this still selects the Zone



What do you mean by "SELECT" as there is no button on the radio called SELECT
Do you mean the Green button

BTW.
I checked the User Guide and there is also no reference to a SELECT button

[G4EML]

I think he is refering to SK2 + Rotary. That changes zone directly.
I have just tried it and it works fine here. So it sounds like a codeplug problem.
The special 'All channels' zone is the last to be selected so it could be there is a bad channel causing this.

Colin.

[EA5JOQ]

Hi, RT3S freezes when you use SK2 + SELECT to change Zones. When you reach the last Zone, if you turn the selector once more, then RT3S freezes, instead goes to the first Zone.

Please explain in more detail

I just tested


Green (to main menu)
Up / Down to Zone
Green to enter Zone menu
Up / Down to specific zone name

Now... Normally you just press Green to select the Zone.

Following your bug, I pressed SK2 + Green

And this still selects the Zone



What do you mean by "SELECT" as there is no button on the radio called SELECT
Do you mean the Green button

BTW.
I checked the User Guide and there is also no reference to a SELECT button

Hi, is the rotatory. In the doc appears as "SELECT"

[EA5JOQ]

I think he is refering to SK2 + Rotary. That changes zone directly.
I have just tried it and it works fine here. So it sounds like a codeplug problem.
The special 'All channels' zone is the last to be selected so it could be there is a bad channel causing this.

Colin.

I programed it in a new codeplug. What can be wrong? The "All Channels" zone is working, appears the first and no crash

[F1RMB]

Reflaah it (the codeplug).
If the problem still exist afterwards, post it here.

[VK3KYY]

FYI

I already tested Rotary Control + SK2 to change Zone and that also worked fine for me

I suggest you also try using the Zone menu to select zone in turn

[EA5JOQ]

Reflaah it (the codeplug).
If the problem still exist afterwards, post it here.

FYI

I already tested Rotary Control + SK2 to change Zone and that also worked fine for me

I suggest you also try using the Zone menu to select zone in turn

I reflash it and the same happens, I think that the problem is that in Zone option, if I open it and press up arrow, appears blank zones but in my codeplug there is not exists...

[VK3KYY]

Reflaah it (the codeplug).
If the problem still exist afterwards, post it here.

FYI

I already tested Rotary Control + SK2 to change Zone and that also worked fine for me

I suggest you also try using the Zone menu to select zone in turn

I reflash it and the same happens, I think that the problem is that in Zone option, if I open it and press up arrow, appears blank zones but in my codeplug there is not exists...

There is obviously some problem with your codeplug if the Zone names are not being displayed in the Zone list screen

Try exporting your codeplug to CSV and then import again, and see if the problem still exists.

Also, make sure you didn't use any special or accent characters in your zone names

[EA5JOQ]

There is obviously some problem with your codeplug if the Zone names are not being displayed in the Zone list screen

Try exporting your codeplug to CSV and then import again, and see if the problem still exists.

Also, make sure you didn't use any special or accent characters in your zone names

How can I export it to csv?