OpenGD77

Hello.
I found some bugs in version 20230904.
1. Bug in theme chooser.
Left picture version firmware 20230818, right picture version 20230904 (20230903) 2. Bug in radio calibration .
You can't change 1/4 to 2/4 etc.
Power 250W.
Left picture version firmware 20230818, right picture version 20230904 (20230903) 2. Bug in menu options in in the Polish language. Marked with a red circle.
In Polish it should read "Kalibracja radia".
Left picture version firmware 20230818, right picture version 20230904 (20230903) Vy 73
SQ9KCU

Thanks

I will investigate and fix

The radio calibrate menus changed into several pages 1/4 - 4/4

Use SK2 + up/down arrows to jump between page 1 to 4

There are multiple different bugs here

The UV380/DM1701 etc have a calibration setting which the other radios don't have, and the "mW" unit value was accidently removed when the calibration on all radios was unified

The problem with the name of the Radio Calibration menu item looks like its something wrong in the translation file for Polish, because I don't see any problems in the English version

Update.

There is a problem with most languages except english with the text "Radio Calibration" , being 17 characters long, where the screen size if normally only 16 characters wide using the normal menu font

In the English version this text is "Calibration" , so I'll need to update all non-English languages to make sure none of the translated texts are longer than 16 characters

The fixes for these problems will be in the next Beta release

SA0BUX wrote: ↑

Thu Sep 14, 2023 9:02 pm

The radio calibrate menus changed into several pages 1/4 - 4/4

Use SK2 + up/down arrows to jump between page 1 to 4

Hello.
I searched a lot, but I couldn't come up with the SK2 /UP/DOWN combination.
Thanks!