The displayed TS is the one you will transmit on, BUT if you change the channels setting and a TS override is set, the displayed TS won't change, as override takes priority.vanguard wrote: ↑Sun Mar 13, 2022 7:13 pmHi dear folks,
I discovered some (little) bugs in latest opengd77.
1. When you got wrong timeslot, you can change it in "channel settings", i.e. from TS2 to TS1. With pressing blue-key + green-key, this should be confirmed in the codeplug, which is done. But: It does not change in the channel, it is still shown as the former (in my example TS2) in the display.
However, if you recheck the settings in "channel settings", you will see, that there is correctly set "TS1", but TS2 is shown in display.
Turn the Options -> Display options -> Info to TS or Both, it will display the TS using bold font when a manual override is set.
Sweep scan steps are relative to displayed BW, not channel settings: 1.25kHz, 2.50kHz, 5.00kHz, 10.00kHz, 25.00kHz, 50.00kHz, 100.00kHzvanguard wrote: ↑Sun Mar 13, 2022 7:13 pm2. In spectrum analyzer menu (long pressing "#"-key), the given steps are not correct, for example, when the display sjows +/-25khz, then not 25khz is the step, but 2.5khz. Just a 1/10 of the shown step. But the 1/10 is not default, and if the frequency is i.e. *.3625 at the end, then there is a 1.25khz step. It would be nice, if there could be steps like 6,25khz, 12,5khz, 25khz, 50khz, 100khz and 1MHz - if this could be programmed.
User manual is on github, you can submit PR there.
Cheers.
---
Daniel