Fecskebeka

User avatar
Fecskebeka
Posts: 105
Joined: Thu Jun 03, 2021 7:36 pm
Location: Hungary

Re: Fecskebeka

Post by Fecskebeka » Sat Dec 04, 2021 1:24 pm

Hi,

Public Beta (2021 12 03)
It's working now. ;) THX!!
This beta has been running for 20 hours. DW: off
F1RMB wrote:
Sat Nov 27, 2021 3:24 am
Turn you DMR Filtering OFF.

For the very last time, turning CC filter OFF is not for normal usage, is for detection of unknown CC value, hence, don't try to detect something while applying constraints on top of it.
Last edited by Fecskebeka on Sat Dec 04, 2021 1:47 pm, edited 2 times in total.

User avatar
Fecskebeka
Posts: 105
Joined: Thu Jun 03, 2021 7:36 pm
Location: Hungary

Re: Fecskebeka

Post by Fecskebeka » Sat Dec 04, 2021 1:36 pm

BUT
Fecskebeka wrote:
Sat Nov 27, 2021 7:57 am
Have a nice day!
Hi Daniel!

.......
And look at the last moment.
I turn CC mode back on "in vain."
Decoding does not work.
I have to turn the radio off and on or press PPT.

THX
73
......
This is still not working in the Public Beta (2021 12 03) section!
I switch to the default state, filters on. (Quick menu)
There had been an audible sound before
Now there is no voice, no speech!

DMR SCAN cannot focus on real RX reception either.
Only over ~450ms scan dwell.

THX

User avatar
Fecskebeka
Posts: 105
Joined: Thu Jun 03, 2021 7:36 pm
Location: Hungary

Re: Release Candidate (2022 02 15)

Post by Fecskebeka » Thu Feb 17, 2022 6:29 pm

Hi evryone

Previous release.
Unfortunately, I can confirm the freeze!
DM1801 2022.01.02 firmware.
He's already here.
WDT: off
Eco level: 1 (2 also)
CC filter: off
DMR mode
simplex, Rx reception only
the other radio has a variable cc code set
no other third-party broadcasts
some transmission - stops after Rx reception (~ 4-5 Tx <5 minutes)
the radio cannot be switched off.
it can only be restarted by removing the battery.

Turning on,
it did not freeze again in a short time.

But yes. frozen
It froze in ~ <10 minutes.
without incoming signal

I would be sorry if this option ceased!

I will install the Release Candidate (February 15, 2022).
let's see

Thx

User avatar
Fecskebeka
Posts: 105
Joined: Thu Jun 03, 2021 7:36 pm
Location: Hungary

Re: Release Candidate (2022 02 15)

Post by Fecskebeka » Thu Feb 17, 2022 9:04 pm

I will confirm the error here as well :(
Same conditions
Fecskebeka wrote:
Thu Feb 17, 2022 6:29 pm
Hi evryone
........
I will install the Release Candidate (February 15, 2022).
let's see

Thx

User avatar
Fecskebeka
Posts: 105
Joined: Thu Jun 03, 2021 7:36 pm
Location: Hungary

Re: Release Candidate (2022 02 15)

Post by Fecskebeka » Fri Feb 18, 2022 6:40 pm

The green LED also indicates abnormal.
DM1801 DMR mode, CC filter: on
At a different cc, it does not light up, or flashes up and up at the end of the signal. Sometimes it shows better
If receiving a traditional FM signal, it lights up properly.

Looking at the previous version, DMR receive, it works effectively there.
Also for different cc code..
Fecskebeka wrote:
Thu Feb 17, 2022 9:04 pm
I will confirm the error here as well :(
Same conditions
Fecskebeka wrote:
Thu Feb 17, 2022 6:29 pm
Hi evryone
........
I will install the Release Candidate (February 15, 2022).
let's see

Thx

User avatar
Fecskebeka
Posts: 105
Joined: Thu Jun 03, 2021 7:36 pm
Location: Hungary

Re: Release Candidate (2022 02 20)

Post by Fecskebeka » Sun Feb 20, 2022 9:36 am

Thank you all!

I need to get used to the new CC scan feature.
So if I guess correctly, I can’t answer right away.
I need to set the radio to the CC code I found. ??


The green LED will still give an abnormal signal when receiving a different CC code.
Plus, it doesn't signal the same on different radios.
There are some that do not even indicate that the frequency is busy. Or rarely.

I don't know if the green and red leds are standard signals?
Can a switchable "jamming signal" be used when the frequency is busy, the green and red LEDs at the same time? Orange.

Greeting! Thanks!

User avatar
Fecskebeka
Posts: 105
Joined: Thu Jun 03, 2021 7:36 pm
Location: Hungary

Re: Release Candidate (2022 02 20)

Post by Fecskebeka » Sun Feb 20, 2022 2:20 pm

Misunderstanding!
There is no mistake!
One channel was vox: on.
That stopped him!

I apologize!

Regrettable, there is no automatic restart option.
I know we've talked about this before ...

thx. 73
__________________________________________________---
null and void
DM1801 FM- UHF mode
the scan function stopped twice
it has happened within 1-1.5 hours so far
(60ms, ~14 chanels, suspend: off, scan mode: hold; disp. mode: manual (off))

i don't know if it was a reboot

I will keep watching
THX
Last edited by Fecskebeka on Wed Feb 23, 2022 11:03 pm, edited 2 times in total.

User avatar
Fecskebeka
Posts: 105
Joined: Thu Jun 03, 2021 7:36 pm
Location: Hungary

Minimum Vox level the physical lower limit?

Post by Fecskebeka » Sun Feb 20, 2022 8:41 pm

Hi

DM-1801
Is the Vox Sensitivity 2 value the physical lower limit?
Would it be possible to achieve higher sensitivity with software?

You need to be able to speak quite loudly even with a value of 2 to start voice start.
While the radio beautifully transmits even whispering sounds in DMR mode, noiselessly. But it also performs well in FM mode with a good signal-to-noise ratio.

THX 73

User avatar
F1RMB
Posts: 2517
Joined: Sat Nov 16, 2019 5:42 am
Location: Grenoble, France

Re: Minimum Vox level the physical lower limit?

Post by F1RMB » Sun Feb 20, 2022 9:07 pm

Search the hardware fix for MD-1801 poor audio level (on this forum).

User avatar
Fecskebeka
Posts: 105
Joined: Thu Jun 03, 2021 7:36 pm
Location: Hungary

Re: Minimum Vox level the physical lower limit?

Post by Fecskebeka » Sun Feb 20, 2022 11:11 pm

Yes, that I know. I've read it before long time ago.
(https://opengd77.com/viewtopic.php?f=17 ... =mic+level)
The question was not about modulation. You didn't answer the question.
Although it may have something to do with it. And modulation is not so bad.

Does the GD77 radio work great this function?
Unfortunately, I only have such a simple radio.

Thx, 73

Post Reply