Hello and best wishes to everyone.
I would like to thank first of all the people who are programming the firmware for the various models of radio.
for me this is my second dmr radio and my choice for the second radio was because i liked how GD77 Works.
its a great program and works well on my DM 1701..
I uploaded a codeplug suitable for the radio after it has been modified for OpenGD77.
It contains a lot of entries for the Brandmeister system,
as for myself.. im a typical ham started out in mid 80's with a good foundation in computers and electronics.
73 to everyone. OpenGD77 is a great project.
Kenny
(-:
== Hello from VO1KJM /VE9 73 ==
Re: == Hello from VO1KJM /VE9 73 ==
Welcome
You probably already know but you can manually enter TG numbers and also have lists of TG's which you assign to a specific channel
You are limited to 32 TG's in each list, but you could group TG's into separate lists if you have loads of them.
You would then need to duplicate channels and use a different TG list for each channel, but people normally just manually enter the TG number if they use a large number of TGs, as this is quicker than scrolling through a long list to get to the TG you want to use
You probably already know but you can manually enter TG numbers and also have lists of TG's which you assign to a specific channel
You are limited to 32 TG's in each list, but you could group TG's into separate lists if you have loads of them.
You would then need to duplicate channels and use a different TG list for each channel, but people normally just manually enter the TG number if they use a large number of TGs, as this is quicker than scrolling through a long list to get to the TG you want to use