Hello

New users must post here first and let us know a little bit about yourself.
Post Reply
w9tjp
Posts: 2
Joined: Thu Jan 25, 2024 8:27 pm

Hello

Post by w9tjp » Fri Jan 26, 2024 10:09 pm

Greetings from Milwaukee. Excited to get going with this.

Tom, W9TJP
Top
VK3KYY
Posts: 7590
Joined: Sat Nov 16, 2019 3:25 am
Location: Melbourne, Australia

Re: Hello

Post by VK3KYY » Fri Jan 26, 2024 10:34 pm

Welcome

Which OpenGD77 compatible radio(s) do you have ?
Top
w9tjp
Posts: 2
Joined: Thu Jan 25, 2024 8:27 pm

Re: Hello

Post by w9tjp » Fri Jan 26, 2024 10:52 pm

Trying to load it onto the Retevis RT3S. I've hit a snag but trying to do this at work is not ideal because I keep getting interrupted. I will dig deeper into this tonight.
Top
VK3KYY
Posts: 7590
Joined: Sat Nov 16, 2019 3:25 am
Location: Melbourne, Australia

Re: Hello

Post by VK3KYY » Fri Jan 26, 2024 11:05 pm

w9tjp wrote: ↑
Fri Jan 26, 2024 10:52 pm
 Trying to load it onto the Retevis RT3S. I've hit a snag but trying to do this at work is not ideal because I keep getting interrupted. I will dig deeper into this tonight.
OK.

Make sure you have the correct version of STM DFU Driver

I made a video yesterday showing the installation processon on the TYT MD2017/Retevis RT-82 yesterday, which is basically the same, except for the buttons to get the radio to enter update mode

If you look at the video at around the 2 minute mark, it shows what you should see in the Windows device manager

https://youtu.be/ZvFfMJ_FyUI?t=120
Top
Post Reply

Return to “New members must post here first”