Page 1 of 1
off filter and frequency sweep on the VFO
Posted: Tue Oct 25, 2022 11:37 pm
by PU5GRG
Hello goodnight.
Congratulations on this beautiful project.
I ask how to disable filters like opengd from radio baofenge.
When I scan the VFO it goes straight through the frequency.
example: 162.09375 in the scan it stops 162.900, 162.950, 162.1000.
Could this be a problem?
73
Re: off filter and frequency sweep on the VFO
Posted: Wed Oct 26, 2022 5:41 am
by VK3KYY
PU5GRG wrote: ↑Tue Oct 25, 2022 11:37 pm
Hello goodnight.
Congratulations on this beautiful project.
I ask how to disable filters like opengd from radio baofenge.
When I scan the VFO it goes straight through the frequency.
example: 162.09375 in the scan it stops 162.900, 162.950, 162.1000.
Could this be a problem?
73
You did not explain the problem clearly
What mode are you scanning in, FM , DMR, to you have Rx CTCSS enabled etc
Filters for CTCSS and DMR TG and TS can be disabled in thq QuickMenu.
Note.
It is not possible to scan for DMR transmissions of unknown Colour Code (CC) the hardware does not have the ability to disable the CC filter.
We have a function to scan for the CC of a DMR transmission, but this function can only be activated when Not doing a frequency scan.
Re: off filter and frequency sweep on the VFO
Posted: Mon Oct 31, 2022 9:36 pm
by PU5GRG
Goodnight
How can scan the cc of a DMR transmission frequency
thanks
Re: off filter and frequency sweep on the VFO
Posted: Tue Nov 01, 2022 6:16 am
by VK3KYY
PU5GRG wrote: ↑Mon Oct 31, 2022 9:36 pm
Goodnight
How can scan the cc of a DMR transmission frequency
thanks
https://github.com/LibreDMR/OpenGD77_Us ... .md#filter