off filter and frequency sweep on the VFO

New users must post here first and let us know a little bit about yourself.
Post Reply
PU5GRG
Posts: 5
Joined: Fri Feb 11, 2022 11:03 pm

off filter and frequency sweep on the VFO

Post by PU5GRG » Tue Oct 25, 2022 11:37 pm

Hello goodnight.
Congratulations on this beautiful project.
I ask how to disable filters like opengd from radio baofenge.
When I scan the VFO it goes straight through the frequency.
example: 162.09375 in the scan it stops 162.900, 162.950, 162.1000.
Could this be a problem?



73

VK3KYY
Posts: 7478
Joined: Sat Nov 16, 2019 3:25 am
Location: Melbourne, Australia

Re: off filter and frequency sweep on the VFO

Post by VK3KYY » Wed Oct 26, 2022 5:41 am

PU5GRG wrote:
Tue Oct 25, 2022 11:37 pm
Hello goodnight.
Congratulations on this beautiful project.
I ask how to disable filters like opengd from radio baofenge.
When I scan the VFO it goes straight through the frequency.
example: 162.09375 in the scan it stops 162.900, 162.950, 162.1000.
Could this be a problem?



73
You did not explain the problem clearly

What mode are you scanning in, FM , DMR, to you have Rx CTCSS enabled etc
Filters for CTCSS and DMR TG and TS can be disabled in thq QuickMenu.

Note.
It is not possible to scan for DMR transmissions of unknown Colour Code (CC) the hardware does not have the ability to disable the CC filter.

We have a function to scan for the CC of a DMR transmission, but this function can only be activated when Not doing a frequency scan.

PU5GRG
Posts: 5
Joined: Fri Feb 11, 2022 11:03 pm

Re: off filter and frequency sweep on the VFO

Post by PU5GRG » Mon Oct 31, 2022 9:36 pm

Goodnight
How can scan the cc of a DMR transmission frequency
thanks

VK3KYY
Posts: 7478
Joined: Sat Nov 16, 2019 3:25 am
Location: Melbourne, Australia

Re: off filter and frequency sweep on the VFO

Post by VK3KYY » Tue Nov 01, 2022 6:16 am

PU5GRG wrote:
Mon Oct 31, 2022 9:36 pm
Goodnight
How can scan the cc of a DMR transmission frequency
thanks
https://github.com/LibreDMR/OpenGD77_Us ... .md#filter

Post Reply