TYT MD9600 V1 Please let me know which version of the software for V1 should be uploaded to make it Open GD77

[SQ3JPL]

Hello, I'm from Poland.
I have a TYT MD 9600 V1
S / N 1705A01872
CPS Software V01.27
Hardware V01.00
MCU V006.021
Please let me know which version of the software for V1 should be uploaded to make it Open GD77
Thank you greetings.

[G4EML]

The only difference between the V1 firmware and the V2 firmware is the display dimming.

Start with the V1 firmware, if the display dimming doesn’t work then use the V2 firmware.

Colin.

[SQ3JPL]

Ok. Please write which specific software should I upload, I am asking because neither V1 nor V2 want to install.
When uploading it is successful in 30% and then an error crashes.

[G4EML]

Are you following the correct procedure?
https://opengd77.com/viewtopic.php?f=18&t=2035#p17115

The open firmware cannot be loaded using the official loader.

[SQ3JPL]

I have a problem the website is not working
Download the latest OpenGD77CPS from here
downloads/CPS/Firmware_Release_20220228 ... .23.01.exe

[G4EML]

The latest CPS can be found here...https://opengd77.com/downloads/CPS/Latest/

[VK3KYY]

I have a problem the website is not working
Download the latest OpenGD77CPS from here
downloads/CPS/Firmware_Release_20220228 ... .23.01.exe

Do you have a radio callsign, its site policy to use your callsign.

[SQ3JPL]

Thank you for the description and help.
Everything is already taken care of.
My OpenMD9600 is great.
Thank you to everyone involved for your help.
VK3KYY
G4EML
SQ7LQT
Regards, Rafał SQ3JPL

[VK3KYY]

Hi

I have changed you login username to your callsig SQ3JPL because this is site policy