Greetings from North Carolina

New users must post here first and let us know a little bit about yourself.
Post Reply
W4DCE
Posts: 2
Joined: Tue Sep 28, 2021 7:17 pm

Greetings from North Carolina

Post by W4DCE » Wed Sep 29, 2021 7:01 pm

Just bought a GD-77 and reading up on the install process for OpenGD77. Already have pi-star and and MD-380 running with MD380Tools but looking forward to what OpenGD77 offers.

One question before I install OpenGD77 is will I loose any significant features of the regular firmware and CPS from Radioddity? When I check the settings on the HT it says V4.03.07 on Dev Info / Soft Version. Is this the software that I'm to overwrite with Firmware Software V4.3.6? Accounting for decimals and Zero's I assume V4.3.6 is later and more advanced, but want to make sure V4.03.07 doesn't mean V4.3.7 and ensure I'm not going backwards.

Otherwise is there any downside on trying OpenGD77? Should I become familiar with the factory firmware and CPS first?

Thanks in advance for advice.

Sincerely,
Derek - W4DCE

G4EML
Posts: 919
Joined: Sat Nov 16, 2019 10:01 am

Re: Greetings from North Carolina

Post by G4EML » Wed Sep 29, 2021 7:23 pm

When you install OpenGD77 you do not load 4.3.6 into the radio, but you need a copy of it on your computer. The OpenGD77 CPS needs access to the file so that it can use a small part of it to build the OpenGD77 firmware. It is done like this to avoid licensing issues.

Open GD77 does not support text messaging , dual timeslot simplex mode or encryption. So if you need any of those features it will not be suitable for you. In most other respects the open firmware is much more Ham radio friendly than the original. It has a completely different user interface, so there is little to be gained by learning the original.

Open GD77 was written from scratch by and for Ham radio users. It is not a patched version of the official firmware like MD380 Tools.

Colin G4EML.

KI5PGJ
Posts: 30
Joined: Tue Jul 06, 2021 1:10 pm

Re: Greetings from North Carolina

Post by KI5PGJ » Wed Sep 29, 2021 7:25 pm

If you are an Amateur Radio licensee just install OpenGD77 and proceed. It is designed for hams, the day I received my GD77s I immediately installed OpenGD77 and have never looked back.

73
KI5PGJ

W4DCE
Posts: 2
Joined: Tue Sep 28, 2021 7:17 pm

Re: Greetings from North Carolina

Post by W4DCE » Thu Sep 30, 2021 12:59 pm

Thank you Colin G4EML and KI5PGJ.
I will proceed with OpenGD77.

73,
Derek - W4DCE

VK3KYY
Posts: 7478
Joined: Sat Nov 16, 2019 3:25 am
Location: Melbourne, Australia

Re: Greetings from North Carolina

Post by VK3KYY » Thu Sep 30, 2021 10:10 pm

W4DCE wrote:
Thu Sep 30, 2021 12:59 pm
Thank you Colin G4EML and KI5PGJ.
I will proceed with OpenGD77.

73,
Derek - W4DCE
Your username has been updated to your callsign, as its site policy to use your callsign as username if you have one

Post Reply