[Corrupted official firmware] Radio won't enter the bootloader

New users must post here first and let us know a little bit about yourself.
VK3KYY
Posts: 7490
Joined: Sat Nov 16, 2019 3:25 am
Location: Melbourne, Australia

Re: [Corrupted official firmware] Radio won't enter the bootloader

Post by VK3KYY » Fri Apr 30, 2021 9:47 pm

Hi Holger

Its bad programming on their part. The bootloader should never do checks that prevent it updating the main firmware.

Also the main application firmware also must be doing something which is a really bad idea, as it must be updating the same internal ROM that contains the main application

Its always high risk doing these things, hence the OpenGD77 does not do them

kc1ogs
Posts: 1
Joined: Fri May 14, 2021 12:27 pm

Re: [Corrupted official firmware] Radio won't enter the bootloader

Post by kc1ogs » Mon May 17, 2021 8:17 pm

I have the Same issue with Firmware V4.2.6. curious if you have pictures on the setup for manually doing it with the bootloader and where you soldered to the board? thanks. Jim C, KC1OGS

VK3KYY
Posts: 7490
Joined: Sat Nov 16, 2019 3:25 am
Location: Melbourne, Australia

Re: [Corrupted official firmware] Radio won't enter the bootloader

Post by VK3KYY » Mon May 17, 2021 9:13 pm

I don't think I have any photos, but the pads you need to connect to are clearly labeled and are on the virtually empty side of the PCB which you see as soon as you open the radio

I think Jason VK7ZJA has photos of the PCB on the couple of web pages he created about the GD77

VK3KYY
Posts: 7490
Joined: Sat Nov 16, 2019 3:25 am
Location: Melbourne, Australia

Re: [Corrupted official firmware] Radio won't enter the bootloader

Post by VK3KYY » Tue May 18, 2021 10:59 pm

I've realised that the patched bootloaders were in one of the repositories which I had to remove because they breach the Github terms and conditions

So I've now made those files availble on this server

https://www.opengd77.com/downloads/patched_bootloaders/

Post Reply