Hello everyone, I am from Nanning, China

New users must post here first and let us know a little bit about yourself.
Post Reply
BG7SBJ
Posts: 5
Joined: Wed Jun 22, 2022 2:13 am

Hello everyone, I am from Nanning, China

Post by BG7SBJ » Wed Jun 22, 2022 2:44 am

I have a DM-1801, to learn about the GD77 and try to Flash it....

VK3KYY
Posts: 7475
Joined: Sat Nov 16, 2019 3:25 am
Location: Melbourne, Australia

Re: Hello everyone, I am from Nanning, China

Post by VK3KYY » Wed Jun 22, 2022 5:27 am

BG7SBJ wrote:
Wed Jun 22, 2022 2:44 am
I have a DM-1801, to learn about the GD77 and try to Flash it....
Is your DM-1801 a new or old radio?

The latest DM-1801 is not supported because is it has completely different radio hardware to the old version

BG7SBJ
Posts: 5
Joined: Wed Jun 22, 2022 2:13 am

Re: Hello everyone, I am from Nanning, China

Post by BG7SBJ » Mon Jul 04, 2022 1:10 am

I bought it in 2019
I think it should be the old version, and the device firmware version number shows that it is V1.0

VK3KYY
Posts: 7475
Joined: Sat Nov 16, 2019 3:25 am
Location: Melbourne, Australia

Re: Hello everyone, I am from Nanning, China

Post by VK3KYY » Mon Jul 04, 2022 3:25 am

BG7SBJ wrote:
Mon Jul 04, 2022 1:10 am
I bought it in 2019
I think it should be the old version, and the device firmware version number shows that it is V1.0
OK. That's good.
The firmware should be compatible.

BG7SBJ
Posts: 5
Joined: Wed Jun 22, 2022 2:13 am

Re: Hello everyone, I am from Nanning, China

Post by BG7SBJ » Tue Jul 05, 2022 1:11 am

VK3KYY wrote:
Mon Jul 04, 2022 3:25 am
BG7SBJ wrote:
Mon Jul 04, 2022 1:10 am
I bought it in 2019
I think it should be the old version, and the device firmware version number shows that it is V1.0
OK. That's good.
The firmware should be compatible.
Oh, I'm mistaken :o , the new communication line just arrived yesterday, re-looked at the software, the content is as follows, can it be compatible?
20220705090159.png
firmwave version: V2.02.01
DSP Version:HRC6000 V1.2

PS: But strangely, when I read the device, Chinese mode state, the model number displayed by the software was MD-760

User avatar
F1RMB
Posts: 2517
Joined: Sat Nov 16, 2019 5:42 am
Location: Grenoble, France

Re: Hello everyone, I am from Nanning, China

Post by F1RMB » Tue Jul 05, 2022 1:18 am

Hi,
BG7SBJ wrote:
Tue Jul 05, 2022 1:11 am
VK3KYY wrote:
Mon Jul 04, 2022 3:25 am
BG7SBJ wrote:
Mon Jul 04, 2022 1:10 am
I bought it in 2019
I think it should be the old version, and the device firmware version number shows that it is V1.0
OK. That's good.
The firmware should be compatible.
Oh, I'm mistaken :o , the new communication line just arrived yesterday, re-looked at the software, the content is as follows, can it be compatible?
20220705090159.png

firmwave version: V2.02.01
DSP Version:HRC6000 V1.2

PS: But strangely, when I read the device, Chinese mode state, the model number displayed by the software was MD-760
Something is wrong with the attached picture.


Cheers.
---
Daniel

User avatar
F1RMB
Posts: 2517
Joined: Sat Nov 16, 2019 5:42 am
Location: Grenoble, France

Re: Hello everyone, I am from Nanning, China

Post by F1RMB » Tue Jul 05, 2022 1:21 am

If the radio stays in bootloader mode (SK1 + SK2 + Power On: no screen, lit LED), it would be good.

BG7SBJ
Posts: 5
Joined: Wed Jun 22, 2022 2:13 am

Re: Hello everyone, I am from Nanning, China

Post by BG7SBJ » Tue Jul 05, 2022 5:43 am

Okay, thanks, I've Flash in GD77 version 4.3.6 and am testing it

VK3KYY
Posts: 7475
Joined: Sat Nov 16, 2019 3:25 am
Location: Melbourne, Australia

Re: Hello everyone, I am from Nanning, China

Post by VK3KYY » Tue Jul 05, 2022 6:02 am

BG7SBJ wrote:
Tue Jul 05, 2022 5:43 am
Okay, thanks, I've Flash in GD77 version 4.3.6 and am testing it
4.x.x is not the OpenGD77 firmware.

OpenGD77 firmware version is the release date

Post Reply