OpenGD77

Question was about remote operating opengd77 radio from internet, but nevermind... OK There is no terminal mode etc This would require a composite USB device to provide an audio device as well as a control device (com port). There is insufficient space in the ROM for this, and its not known whether...

There are phones with built in DMR radios

There are also phone apps that communciate with DMR servers so that no radio is required

These are both out of the scope of this forum.

Welcome

Although it is logical when calibrating the power of the radio, I'm certain people would also complain that when they wanted to set a sepecific power level e.g. 600mW that the user interface was wrong because the step size is a strange value (16) This would need to be a separate function for when ca...

Good day! 1. What version of the firmware must be loaded into the Baofeng DM1801 for the radio to switch to the HOTSPOT access point mode? 2. At what point does the HOTSPOT mode on the Baofeng DM1801 radio turn on? 3. What COM port speed should be set when connecting to Baofeng DM1801 with GD77 fir...

looking forward to seeing where this project goes Welcome There is not much scope for further development on the GD77 / DM1801 / RD5R hardware platform, because of hardware limitations. There is also very little program space remaining in the ROM Versions that run on other older radio hardware for ...

From repeater. Hi Roger, The radio was receiving a qso on the talkgroup italy. TS1 Was the signal from a repeater or a hotspot? OK. I thought possibly the problem was related to weak DMR signals, but this is probably not the cause, because someone reported it crashed in Satellite mode, which is FM ...

We are aware of this bug, but at the moment, don't know what is causing it

IU4LEG wrote: ↑

Sun Nov 28, 2021 5:42 pm

Hi Roger,
The radio was receiving a qso on the talkgroup italy. TS1

Was the signal from a repeater or a hotspot?

n9qhf wrote: ↑

Sun Nov 28, 2021 5:26 pm

Looking forward to the open gd 77 firmware....... thanks

Welcome

Please read the post about installation

https://www.opengd77.com/viewtopic.php?f=5&t=1770

And also the FAQ

https://www.opengd77.com/viewtopic.php?f=5&t=71