OpenGD77

VK3KYY wrote: ↑

Mon Jan 22, 2024 9:32 am

I am looking for Alpha testers for a version of OpenGD77 which will run on the TYT MD2017 and the Retevis RT-82

Please post here is you have either of these radios and would be willing to be an Alpha version tester

I have a RT-82 that be used as a test object.

OK, what I tried so far is defining a TG 262999 and a channel referencing this GPS-TG in its field "contact" (no TG-List). I also set the field "TS1 Talker Alias TX" to APRS . The Brandmeister APRS configuration is defined and works well with other radios (e.g. Anytone 878UVII+) Selecting this chan...

Hello, success, I got the OpenGD77 fw to run on my MD-UV390. Very good software. Thanks to the OoenGD77 team for this. Just another question: I'm interested in using APRS. With FM I got it to run. Does OpenGD77 also support APRS with DMR? Thanks, 73 de Hans (DL1HGB) You can send APRS via talker ali...

Don't understand what he means with "after R" either.

Maybe it's a typo, or some bad translation.

Manual is here: https://github.com/LibreDMR/OpenGD77_Us ... r_Guide.md

Flash of DM-1701 is similar to RT3S/MD-UV380: viewtopic.php?f=25&t=2760

hi SA0BUX, I don't understand the question. I have written several times which CPS and FW I use. Is it possible that I have been misunderstood? I am pleased that I was able to bring my GD77 to life with Radioddity-SW. Now I want to install an OpenGD77 firmware in the GD77 with OpenGD77. And that do...

Hello Volker, I do not use the OpenGD77 firmware from downloads/releases/MK22/R20231231/firmware. As already written, I cannot install an OpenGD77 firmware with OpenGD77 R2023.11.26.02. 73, Reinhard But what file do you use then? You should use one of later files with this CPS, mixing old firmware ...

Hallo Reinhard, You should be fine if you put your radio in DFU mode now and just re-flash OpenGD77. Windows 11 is a bit weird with the drivers for DFU mode. Re-Install OpenGD77CPS and leave the checkmark to install the serial driver selected, then reboot your PC after trying to flash again. Still,...

I double checked and my BM SelfCare and the radio Brand is set to ETSI and In-Call GPS is turned on I think you need to turn it to the "Chinese Radio" option. With "Chinese Radio" it's not possible to enable "In-Call GPS" in BM Selfcare. I have tested with both ETSI & Motorola + enabled "In-Call GP...

F1RMB wrote: ↑

Sat Jan 13, 2024 4:53 pm

You need to open an existing project from the filesystem.

For the build target, like on Eclipse (same for MCUXpresso, as it's also Eclipse):
BuildTarrgets.png

Tnx, I had the folder above selected , found it when I selected MDUV380_firmware instead.

What's the correct way to import these source files into the STM32 developer program? I can't find how to change the target between MD-UV380 and DM-1701 and the various md-9600 versions. I found it somewhere under project in the earlier source but I can't find it now. By default I got the binary for...