Search found 543 matches
- Wed Mar 27, 2024 3:37 pm
- Forum: TYT MD-UV380/390 / UV380/390 Plus 10W / Retevis RT-3S / Baofeng DM-1701 / DM-1701B / Retevis RT-84
- Topic: Baofeng DM-1701: diagram of the 2 speaker-mic pin
- Replies: 2
- Views: 107
Re: Baofeng DM-1701: diagram of the 2 speaker-mic pin
Hi All, I bought a DM-1701 from less a month with an external "Shoulder Speaker Mic". Still before I modified this radio to opengd77 firmware, neither PTT and loudspeaker were working. On the specification of the "Shoulder Speaker Mic" is written: Compatible Model: Baofeng GT-3 / BF-888S / UV-5R Pl...
- Wed Mar 27, 2024 3:16 pm
- Forum: Hotspot mode
- Topic: Some hotspot woes... Bad intelligibility
- Replies: 22
- Views: 1518
Re: Some hotspot woes... Bad intelligibility
I met the similar problem using 1701 as hotspot working on UHF and another 1701 as the receiver, whatever the receiver worked with factory firmware or with OpenGD77. But, at the same time, voice out of my AT-878UVII Plus was fine enough. When I switched the frequency of hotspot to VHF, everything w...
- Sun Mar 24, 2024 2:35 pm
- Forum: TYT MD-UV380/390 / UV380/390 Plus 10W / Retevis RT-3S / Baofeng DM-1701 / DM-1701B / Retevis RT-84
- Topic: MD9600-CSV(2571V5)-V26.45.bin
- Replies: 12
- Views: 2939
Re: MD9600-CSV(2571V5)-V26.45.bin
I have it here too https://www.sa0bux.se/Ham/opengd77/UB3PEH wrote: ↑Sat Mar 23, 2024 6:40 pmIf it's not difficult for you, please send the donor firmware file to my email - ub3peh@gmail.com
- Sun Mar 24, 2024 10:44 am
- Forum: TYT MD-UV380/390 / UV380/390 Plus 10W / Retevis RT-3S / Baofeng DM-1701 / DM-1701B / Retevis RT-84
- Topic: MD9600-CSV(2571V5)-V26.45.bin
- Replies: 12
- Views: 2939
- Sat Mar 23, 2024 6:27 pm
- Forum: TYT MD-UV380/390 / UV380/390 Plus 10W / Retevis RT-3S / Baofeng DM-1701 / DM-1701B / Retevis RT-84
- Topic: MD9600-CSV(2571V5)-V26.45.bin
- Replies: 12
- Views: 2939
Re: MD9600-CSV(2571V5)-V26.45.bin
- Sat Mar 23, 2024 1:06 pm
- Forum: General discussions
- Topic: Anytone to opengd77
- Replies: 4
- Views: 2415
Re: Anytone to opengd77
qdmr doesn't support the newer codeplug format used in opengd77.oh6kw wrote: ↑Sat Mar 23, 2024 1:00 pmHave anyone test qdrm to convert codeplug from anytone to opengd77?
https://dm3mat.darc.de/qdmr/
- Fri Mar 22, 2024 9:17 pm
- Forum: CPS
- Topic: CPS R2024.03.09.01 Radio Shut Down?
- Replies: 8
- Views: 449
Re: CPS R2024.03.09.01 Radio Shut Down?
Strange, can you power off a 390 via the green button?
I have always used the volume/on-off switch and press sk1 + PTT when powering on radio in DFU mode.
I have always used the volume/on-off switch and press sk1 + PTT when powering on radio in DFU mode.
- Fri Mar 22, 2024 8:43 pm
- Forum: CPS
- Topic: CPS R2024.03.09.01 Radio Shut Down?
- Replies: 8
- Views: 449
Re: CPS R2024.03.09.01 Radio Shut Down?
I just downloaded the new CPS, R2024.03.09.01 to my TYT MD-UV390. It seems to work fine, but a major change is that it turns off my radio after I write to it (reading does not shut off the radio). The previous version left the radio on after a write. I don't see any mention of this in the PDF that ...
- Fri Mar 22, 2024 3:22 pm
- Forum: CPS
- Topic: New CPS 2024 01 22
- Replies: 52
- Views: 10332
Re: New CPS 2024 01 22
Seems that " ' " (Apostrophe) isn't available on the radios character set. Try with " ´ " (Acute accent) or " ` " (Grave accent) , they exist on key number 1 when I try on the radio. (But I haven't verified it in CPS config load) So, Could you please list some characters which I can use? Thanks. I ...
- Fri Mar 22, 2024 11:53 am
- Forum: CPS
- Topic: New CPS 2024 01 22
- Replies: 52
- Views: 10332
Re: New CPS 2024 01 22
BTW, Which punctuation mark can I use in OpenGD77 display? When I use " ' " and " - ", the screen all display " . ", I don't know the reason. QQ截图20240322191416.jpg QQ截图20240322191224.jpg Nevermind , I didn't notice it was for DMR ID Names. Seems that " ' " (Apostrophe) isn't available on the radio...