OpenGD77

SA0BUX wrote: ↑

Wed May 31, 2023 10:06 am

What Eco Level do you use ?

You could try with Eco Level=0 or lower the value to see if that makes any difference.

I tried. It doesn't change anything. I repeat - my error manifests itself 0-2 times a day (in any case, I notice it), so experiments are almost useless.

You're not the only one? Can't remember any report like this here.... I have written about this several times. I have such an error on RT3S, too. Rarely. If you didn't look at the screen, you may not find out that there was no demodulation, just a call was missed.. I didn't keep statistics. The err...

I found a malfunction when scanning RT3S: DMR simplex and duplex channels were scanned. The duplex channels in my codeplage are written as two channels for TS1 and TS2. There was a conversation in the repeater's TS2. After skipping this channel through 2-3 scanning cycles in the channel of the same ...

F1RMB wrote: ↑

Wed May 24, 2023 6:32 am

No, any button press stops the scanning, in any mode.

I was interested in the possibility of implementing such a function. I know how it works now.

Is it possible to automatically resume tracking of both channels in VFO mode after the PTT button has been pressed? That is, after the activity appeared on the channel and the QSO took place, the scanning continues automatically. This mode can also be useful when scanning channels. This would be con...

R1CBU wrote: ↑

Mon May 22, 2023 11:49 am

I started to rewrite the firmware for LVGL. Implemented display, keyboard and button drivers.


youtu.be/nLs1BAQ-jOI

I found a malfunction when scanning RT3S: DMR simplex and duplex channels were scanned. The duplex channels in my codeplage are written as two channels for TS1 and TS2. There was a conversation in the repeater's TS2. After skipping this channel through 2-3 scanning cycles in the channel of the same ...

VK3KYY wrote: ↑

Sat May 13, 2023 6:39 am

EU1AEQ wrote: ↑

Sat May 13, 2023 6:07 am

To display the colors correctly, you need to turn on the inversion of the display

Why use inversion ?

I just wanted to

To display the colors correctly, you need to turn on the inversion of the display

To update the firmware on a retevis that already has the penultimate version, is there an easier procedure or is it the same as for the first installation? The procedure is the same, except that it is not necessary to select the donor file again if it is in the same place as with the previous firmw...