[Resolved] Radioddity Mic reseting firmware?
[Resolved] Radioddity Mic reseting firmware?
Has anyone had an experience whereby connecting an external mic puts the HT running Opengd77 into VFO mode?
Mine is like this:
1. Connect mic
2. press mic button say something
3. I hear morse code
4. HT is in VFO mode
5. I reset zone in settings.
FYI-When I say VFO I mean that the display defaults to showing A & B bands on display.
Thank you
K9JPT
Mine is like this:
1. Connect mic
2. press mic button say something
3. I hear morse code
4. HT is in VFO mode
5. I reset zone in settings.
FYI-When I say VFO I mean that the display defaults to showing A & B bands on display.
Thank you
K9JPT
Re: Radioddity Mic reseting firmware?
I addition to the above check out what happened now. The entire display 'flipped' when I keyed up on the mic.
It seems radioddity products are dangerous.
It seems radioddity products are dangerous.
- Attachments
-
- image90.png (12.21 KiB) Viewed 3563 times
Re: Radioddity Mic reseting firmware?
I use an external mic all the time
It sounds like your mic is acting like an antenna and pumping RF into the radio, and crashing the CPU.
Does you mic have wires for all 6 connections, if so it will be injecting RF into the USB port pins,which is known to crash the radio
It sounds like your mic is acting like an antenna and pumping RF into the radio, and crashing the CPU.
Does you mic have wires for all 6 connections, if so it will be injecting RF into the USB port pins,which is known to crash the radio
Re: Radioddity Mic reseting firmware?
My mic worked very well prior to installing Open GD77.
How would I tell if I have 6 wires?
I noticed some other things. The counter doesn't start when I key the mic and after doing this a couple of times I got message "user Blocked". on BM 3100
Strange.
How would I tell if I have 6 wires?
I noticed some other things. The counter doesn't start when I key the mic and after doing this a couple of times I got message "user Blocked". on BM 3100
Strange.
Re: Radioddity Mic reseting firmware?
Open the mic and see how many wires are in the cable
Actually, its probably possible to inject RF up the speaker, mic and PTT wires as well, but normally this doesnt happen, so I'm not sure why your mic is doing this.
Re: Radioddity Mic reseting firmware?
Well thats the thing it worked flawlessly with stock GD77 firmware but now it doesn't.
Did you see the screen display I uploaded?? When I keyed the mic the entire display flipped backwards,
Did you see the screen display I uploaded?? When I keyed the mic the entire display flipped backwards,
Re: Radioddity Mic reseting firmware?
That’s a partial crash, the display controller interpreted the injected RF as the command to change the display orientation.k9jpt@tengstrom.us wrote: ↑Wed May 20, 2020 1:11 pmWell thats the thing it worked flawlessly with stock GD77 firmware but now it doesn't.
Did you see the screen display I uploaded?? When I keyed the mic the entire display flipped backwards,
Although the radio does not have this problem with the official firmware, you are the only person with this problem, and it’s likely you have a hardware problem
The OPENGD77 firmware works the radio hardware a lot harder than the official firmware does, and it’s probably not as tolerant to faulty hardware as the official firmware is.
Re: Radioddity Mic reseting firmware?
Is there a fix for this?
Nice to know your creating high end software and not associating your name with lackluster performance!
Did anyone ever tell you what the other half of your callsign means in Finnish? Rather poisonous actually
https://www.google.com/search?hl=en&as_ ... as_rights=
Nice to know your creating high end software and not associating your name with lackluster performance!
Did anyone ever tell you what the other half of your callsign means in Finnish? Rather poisonous actually
https://www.google.com/search?hl=en&as_ ... as_rights=
Re: Radioddity Mic reseting firmware?
This issue is now resolved. I simply updated my opengd77 firmware and the issue disappeared.
That's all I had to do!
73
K9JPT
That's all I had to do!
73
K9JPT