revert to firmware 2.6.6 ¿?

Post Reply
Juan Francisco
Posts: 19
Joined: Sat May 09, 2020 4:00 pm

revert to firmware 2.6.6 ¿?

Post by Juan Francisco » Wed May 13, 2020 10:41 pm

I know it sounds strange, I currently have the latest version of openGD-77 but I would like to download the version and do a reset (I think that sk2 + 1 clears the memory) and then go back to openGD-77, I don't know if that reduces the calibration. :roll:

sfoto
Posts: 45
Joined: Sat Apr 18, 2020 10:48 am
Location: KO85

Re: revert to firmware 2.6.6 ¿?

Post by sfoto » Thu May 14, 2020 1:29 am

you want to return to stock firmware?

Juan Francisco
Posts: 19
Joined: Sat May 09, 2020 4:00 pm

Re: revert to firmware 2.6.6 ¿?

Post by Juan Francisco » Thu May 14, 2020 4:39 pm

I really have doubts if due to the already known error in one of the original radioddity firmwares it damaged me or modified the calibration (it is more a concern of mine) .
How can I know the original values ​​that radioddity put in the factory radios? And so I can compare them with mine

VK3KYY
Posts: 2390
Joined: Sat Nov 16, 2019 3:25 am
Location: Melbourne, Australia
Contact:

Re: revert to firmware 2.6.6 ¿?

Post by VK3KYY » Thu May 14, 2020 10:00 pm

The official firmware has bugs which corrupt the calibration.

If it has been corrupted there is no way to know the contents of the calibration before the corruption

Juan Francisco
Posts: 19
Joined: Sat May 09, 2020 4:00 pm

Re: revert to firmware 2.6.6 ¿?

Post by Juan Francisco » Fri May 15, 2020 10:45 am

:shock: are not the same values ​​for all radios? If for example someone has a new radio, would its calibration not be for everyone? Or are they values ​​that fit in China in manufacturing? Thank you

User avatar
EB3AM
Posts: 179
Joined: Fri Jan 24, 2020 1:40 pm
Location: Catalonia, not Spain
Contact:

Re: revert to firmware 2.6.6 ¿?

Post by EB3AM » Fri May 15, 2020 12:36 pm

Juan Francisco wrote:
Fri May 15, 2020 10:45 am
:shock: are not the same values ​​for all radios? If for example someone has a new radio, would its calibration not be for everyone? Or are they values ​​that fit in China in manufacturing? Thank you
Every radio has their calibration...
all different, but I make run one radio whitout calibration file, putting other cal file from my radio... and work!
Jordi, EB3AM, Talarn JN02ke, Catalonia.

Juan Francisco
Posts: 19
Joined: Sat May 09, 2020 4:00 pm

Re: revert to firmware 2.6.6 ¿?

Post by Juan Francisco » Fri May 15, 2020 5:59 pm

Hola Jordi , ( yo estoy en Chile pero soy español ;) si pongo en la radio "calibración off" aparentemente funciona pero en los escaneos no se detiene...

if I put on the radio "calibration off" it apparently works but in the scans it doesn't stop ...

Post Reply