-
VK3KYY
- Posts: 7605
- Joined: Sat Nov 16, 2019 3:25 am
- Location: Melbourne, Australia
Post
by VK3KYY » Thu Apr 09, 2020 10:13 am
A few bugs have been found and fixed since the last release.
Fixes since the last pre-release version
- Fix prevent DCS sections in the CPS causing problems with the CTCSS settings, and another CTCSS fix. (thanks to @ajorg )
- Fix for "backlight manual" bug, (thanks to Daniel)
- Fix for Tx freq not being shown when transmitting on the VFO screen, when in Scan mode (thanks to me)
- Heartbeat yellow LED on the GD-77S (thanks to Daniel)
- Set GD-77S default hotspot power to 750mW
Hopefully I will be able to make a formal release this weekend, assuming no other serious bugs are found between now and then.
-
Attachments
-
[The extension sgl has been deactivated and can no longer be displayed.]
-
F1CXG
- Posts: 167
- Joined: Sat Nov 16, 2019 7:24 am
- Location: GRENOBLE (France)
Post
by F1CXG » Thu Apr 09, 2020 10:52 am
Thanks Roger
-
F1RMB
- Posts: 2709
- Joined: Sat Nov 16, 2019 5:42 am
- Location: Grenoble, France
Post
by F1RMB » Thu Apr 09, 2020 11:53 am
Hi Roger,
Also, fixed the bug reported by F6GVE: switching from VFO to Channel when RXing keeps the QSO info on screen.
Cheers.
---
Daniel
-
LY1RF
- Posts: 43
- Joined: Sun Mar 01, 2020 12:05 pm
Post
by LY1RF » Thu Apr 09, 2020 11:59 am
Fix for 77s , but no sql for it?
R.
-
F1RMB
- Posts: 2709
- Joined: Sat Nov 16, 2019 5:42 am
- Location: Grenoble, France
Post
by F1RMB » Thu Apr 09, 2020 12:37 pm
Here they are.
Cheers.
---
Daniel
-
LY1RF
- Posts: 43
- Joined: Sun Mar 01, 2020 12:05 pm
Post
by LY1RF » Thu Apr 09, 2020 1:08 pm
Thaks
-
m1dyp
- Posts: 605
- Joined: Sat Nov 16, 2019 8:03 am
- Location: Hertfordshire, U.K.
-
Contact:
Post
by m1dyp » Thu Apr 09, 2020 1:13 pm
thank you all
-
W1AEX
- Posts: 126
- Joined: Sat Nov 16, 2019 9:00 pm
- Location: Connecticut, USA
-
Contact:
Post
by W1AEX » Thu Apr 09, 2020 2:39 pm
Roger,
Thanks for the April 9 release. Installed it on both of my GD77 radios but unfortunately they both still exhibit the squelch sputtering issue that appeared with the April 4 release. It occurs with FM and FMN when scanning or even monitoring a single frequency. Note that the problem is present even on channels with a programmed RX tone and the busy light does not flash as the squelch sputtering occurs. Also, manually adjusting the squelch to maximum does not stop the issue. No problem with the March 22 and all earlier releases.
73, Rob W1AEX
-
KU4ZD
- Posts: 127
- Joined: Sat Nov 16, 2019 2:47 pm
- Location: Council Bluffs, Iowa
-
Contact:
Post
by KU4ZD » Thu Apr 09, 2020 5:13 pm
I am seeing the same squelch sputtering issue also
W1AEX wrote: ↑Thu Apr 09, 2020 2:39 pm
Roger,
Thanks for the April 9 release. Installed it on both of my GD77 radios but unfortunately they both still exhibit the squelch sputtering issue that appeared with the April 4 release. It occurs with FM and FMN when scanning or even monitoring a single frequency. Note that the problem is present even on channels with a programmed RX tone and the busy light does not flash as the squelch sputtering occurs. Also, manually adjusting the squelch to maximum does not stop the issue. No problem with the March 22 and all earlier releases.
73, Rob W1AEX
-
f6fzo
- Posts: 72
- Joined: Sat Jan 04, 2020 7:28 am
Post
by f6fzo » Thu Apr 09, 2020 5:43 pm
Merci tout bien