Addition power settings?
Re: Addition power settings?
Forking the repo will make it much easier to keep things up to date, as you can use git to pull and merge from my repo.
Sometimes there will be merge conflicts which you will need to handle yourself, but most of the time, git should be able to automatically merge things
Sometimes there will be merge conflicts which you will need to handle yourself, but most of the time, git should be able to automatically merge things
Re: Addition power settings?
I pretty well do the merging manually. Gives me a better look at things than any automatic merging. Personal preference for learning, even if it's the hard way. It's still loads of fun. I have now forked it and merged my code.VK3KYY wrote: ↑Wed Feb 05, 2020 3:45 amForking the repo will make it much easier to keep things up to date, as you can use git to pull and merge from my repo.
Sometimes there will be merge conflicts which you will need to handle yourself, but most of the time, git should be able to automatically merge things
Re: Addition power settings?
@VK3KYY i have measured power on 2 radios look video:
7 watts on VHF
https://www.youtube.com/watch?v=9Ffthnd-ADk
riku oh1e
7 watts on VHF
https://www.youtube.com/watch?v=9Ffthnd-ADk
riku oh1e
Re: Addition power settings?
Riku.
Have you calibrated the 1W and 5W values using the CPS, for the frequencies you are testing on ?
Have you calibrated the 1W and 5W values using the CPS, for the frequencies you are testing on ?
Re: Addition power settings?
no calibration, just upgraded firmware and start using, like most of us do
but anyway i saw on github 5++ watt was removed, so no worries. they are ok now, only was 7watts way too much
but anyway i saw on github 5++ watt was removed, so no worries. they are ok now, only was 7watts way too much
Re: Addition power settings?
I may put the 5W++ back in at some time, as I know some people locally wanted to use it, but the user interface would need to be modified to make it harder to select.
Re: Addition power settings?
totally agree on that maybe settings enable or something. it is only anyway for an emergency, normally that power should not be needed
Re: Addition power settings?
As a matter of interest, I looked up the data sheet for the PA FETS
https://www.nxp.com/docs/en/data-sheet/AFT05MS004N.pdf
I think the same type of FET is used in both the VHF and UHF PA
As you can see, on VHF the FET actually rated at 6W
(But its only rated at between 4.1 and 4.9W on UHF depending on various factors)
Its also worth noting that on DMR its only 50% duty cycle. i.e only 50% of the heat dissipation would be required
https://www.nxp.com/docs/en/data-sheet/AFT05MS004N.pdf
I think the same type of FET is used in both the VHF and UHF PA
As you can see, on VHF the FET actually rated at 6W
(But its only rated at between 4.1 and 4.9W on UHF depending on various factors)
Its also worth noting that on DMR its only 50% duty cycle. i.e only 50% of the heat dissipation would be required
Re: Addition power settings?
As a quick follow up to this.
On UHF on my radio, as soon as the battery voltage gets down to around 65%, even selecting the 5W++ setting, the radio only just about manages to output 5W.
On VHF however, the power output does not seem so dependant on battery voltage, but when the battery gets down to around 60%, you will still need to select 5W++ to continue to get 5W on the output.
On UHF on my radio, as soon as the battery voltage gets down to around 65%, even selecting the 5W++ setting, the radio only just about manages to output 5W.
On VHF however, the power output does not seem so dependant on battery voltage, but when the battery gets down to around 60%, you will still need to select 5W++ to continue to get 5W on the output.