Post
by kd2lh » Mon Feb 03, 2020 2:40 am
Still up and running, but I noticed some strange behavior in trace. The hotspot had been idle for about an hour, and I made calls to the parrot through it. This generated a number of "RF User 0 rejected" errors. It happened both times I called.
M: 2020-02-03 02:37:00.049 DMR Slot 2, RF user 0 rejected
M: 2020-02-03 02:37:00.103 DMR Slot 2, RF user 0 rejected
M: 2020-02-03 02:37:00.406 DMR Slot 2, RF user 0 rejected
M: 2020-02-03 02:37:00.465 DMR Slot 2, RF user 0 rejected
M: 2020-02-03 02:37:00.710 DMR Slot 2, received RF voice header from KD2LH to 9990
M: 2020-02-03 02:37:06.529 DMR Slot 2, RF voice transmission lost from KD2LH to 9990, 5.4 seconds, BER: 1.2%, RSSI: -70/-70/-70 dBm
M: 2020-02-03 02:37:10.500 DMR Slot 2, received network voice header from 9990 to KD2LH
M: 2020-02-03 02:37:15.843 DMR Slot 2, received network end of voice transmission from 9990 to KD2LH, 5.5 seconds, 0% packet loss, BER: 0.0%
M: 2020-02-03 02:37:23.445 DMR Slot 2, RF user 0 rejected
M: 2020-02-03 02:37:23.505 DMR Slot 2, RF user 0 rejected
M: 2020-02-03 02:37:23.807 DMR Slot 2, RF user 0 rejected
M: 2020-02-03 02:37:23.868 DMR Slot 2, RF user 0 rejected
M: 2020-02-03 02:37:23.988 DMR Slot 2, received RF voice header from KD2LH to 9990
M: 2020-02-03 02:37:28.370 DMR Slot 2, RF voice transmission lost from KD2LH to 9990, 4.1 seconds, BER: 1.5%, RSSI: -70/-70/-70 dBm
M: 2020-02-03 02:37:32.461 DMR Slot 2, received network voice header from 9990 to KD2LH
M: 2020-02-03 02:37:36.485 DMR Slot 2, received network end of voice transmission from 9990 to KD2LH, 4.2 seconds, 0% packet loss, BER: 0.0%
The end of the parrot response is also cut off even though the red TX stays on in PiStar the entire length of the response time.