[Fixed] Audio Stuttering

User avatar
SQ7PTE
Posts: 146
Joined: Sat Nov 16, 2019 4:23 am
Location: KO00to
Contact:

Re: Audio Stuttering

Post by SQ7PTE » Sat Jan 25, 2020 7:57 pm

A simple way to get a second radio for the same HotSpot. Adjust the TX frequency of the second radio - BER will be ideal 0.0%
Example: HotSpot GD77 - RXOffset 0, TXOffset 0 Radio TYT 2017 RX-144,550000MHz TX-144550010MHz = BER 0.0% (adjust the frequency terminal TX radio not HotSpot
Attachments
Ashampoo_Snap_2020.01.25_21h02m09s_005_.jpg
Ashampoo_Snap_2020.01.25_21h02m09s_005_.jpg (20.4 KiB) Viewed 3827 times
Ashampoo_Snap_2020.01.25_21h00m54s_004_.jpg
Ashampoo_Snap_2020.01.25_21h00m54s_004_.jpg (96.5 KiB) Viewed 3827 times

User avatar
YT5HOK
Posts: 213
Joined: Sat Nov 16, 2019 11:36 am
Location: Belgrade, KN04FR

Re: Audio Stuttering

Post by YT5HOK » Sat Jan 25, 2020 8:06 pm

No problem, Ken. :)

BTW, you might be able to use both (all) of your DMR handhelds on hotspot... Find the ranges (lower and upper offset) in which each one work, then check for overlap and set accordingly.
That's what I did, and I was lucky enough to find out that all three of mine are very accurately on selected frequency.
Well, they might not overlap at all, but then you really need to open and adjust one of them.

Edit: Piotr, that's a good solution too.

User avatar
SQ7PTE
Posts: 146
Joined: Sat Nov 16, 2019 4:23 am
Location: KO00to
Contact:

Re: Audio Stuttering

Post by SQ7PTE » Sat Jan 25, 2020 8:13 pm

YT5HOK wrote:
Sat Jan 25, 2020 8:06 pm


Edit: Piotr, that's a good solution too.
Marko. Thank you. From you, it's an honor. :-)

User avatar
YT5HOK
Posts: 213
Joined: Sat Nov 16, 2019 11:36 am
Location: Belgrade, KN04FR

Re: Audio Stuttering

Post by YT5HOK » Sat Jan 25, 2020 8:17 pm

SQ7PTE wrote:
Sat Jan 25, 2020 8:13 pm
Marko. Thank you. From you, it's an honor. :-)
Thank you for kind words, but I'm just a beta tester, same as you, equal to everybody else, as we should all be. :)

User avatar
SQ7PTE
Posts: 146
Joined: Sat Nov 16, 2019 4:23 am
Location: KO00to
Contact:

Re: Audio Stuttering

Post by SQ7PTE » Sat Jan 25, 2020 8:20 pm

Well done Marko for these words. Bravo.

User avatar
m1dyp
Posts: 601
Joined: Sat Nov 16, 2019 8:03 am
Location: Hertfordshire, U.K.
Contact:

Re: Audio Stuttering

Post by m1dyp » Sat Jan 25, 2020 8:33 pm

YT5HOK wrote:
Sat Jan 25, 2020 8:06 pm
No problem, Ken. :)

BTW, you might be able to use both (all) of your DMR handhelds on hotspot... Find the ranges (lower and upper offset) in which each one work, then check for overlap and set accordingly.
That's what I did, and I was lucky enough to find out that all three of mine are very accurately on selected frequency.
Well, they might not overlap at all, but then you really need to open and adjust one of them.

Edit: Piotr, that's a good solution too.
thank you

VK3KYY
Posts: 7478
Joined: Sat Nov 16, 2019 3:25 am
Location: Melbourne, Australia

Re: Audio Stuttering

Post by VK3KYY » Sat Jan 25, 2020 8:42 pm

If this is just a frequency offset problem. does changing the frequency of the GD-77 slightly, also fix the problem?

The other possibility is changing the master clock reference frequency in the calibration.

Perhaps we need a debug menu screen that allows some parameters to be adjusted from the radio rather than needing to keep re-uploading the calibration data to do any tests

M6XCX
Posts: 9
Joined: Sat Jan 11, 2020 5:34 pm
Location: Berkshire, UK

Re: Audio Stuttering

Post by M6XCX » Sat Jan 25, 2020 11:37 pm

Firstly, thank you to all of you who replied with some great suggestions.

I thought adjusting the frequency was easiest so started with that.

My hotspot runs at 434.300 (and that seems to match with 434.300 on the Anytone).

I did some trial and error moving the frequency up and down on the oGD-77 and at 434.29965 the stuttering problem seems to have completely gone! :D I'm fixed so very happy and grateful.

I guess the next step is to calibrate the oGD-77 so that I can have it on 434.300 and it matches the hotspot. I have no clue what I'm doing there, but will try and find posts in the forum to learn about it.

Meantime if anyone has any tips, I'm all ears.

Thanks again,
Tony.

VK3KYY
Posts: 7478
Joined: Sat Nov 16, 2019 3:25 am
Location: Melbourne, Australia

Re: Audio Stuttering

Post by VK3KYY » Sat Jan 25, 2020 11:55 pm

I have the same problem with my MD-380

If I set the hotspot for the GD-77 it does not work for the MD-380

Set the hotspot again for the Anytone and then try changing the calibration of the master oscillator frequency

The value for the osc is 1000 if its exactly on frequency,I seen values from around 990 to 1010 in the calibration files people have sent me, so I don't think you need to change the setting very much

M6XCX
Posts: 9
Joined: Sat Jan 11, 2020 5:34 pm
Location: Berkshire, UK

Re: Audio Stuttering

Post by M6XCX » Sun Jan 26, 2020 12:02 am

Great, thank you Roger. Will go and try it and report back.

Cheers,
Tony.

Post Reply