-
F1RMB
- Posts: 2667
- Joined: Sat Nov 16, 2019 5:42 am
- Location: Grenoble, France
Post
by F1RMB » Mon Jan 20, 2020 4:00 pm
W1RHS wrote: ↑Mon Jan 20, 2020 3:55 pm
Yes my Nextion screen works with Transparent Data disabled.
This is probably the answer. Transparent Data is for Nextion connected to the serial pins on the HAT. With Transparent Data enabled the driver probably is still trying to communicate with the HAT and finds the GD-77 instead. Thanks for your help!
In the MMDVM.ini file, you must enable 'Transparent Data' and it's option 'SendFrameType', i.e. :
[Transparent Data]
Enable=1
RemoteAddress=127.0.0.1
RemotePort=40094
LocalPort=40095
SendFrameType=1
Then you can instruct NextionDriver to use the Transparent Data to connect to the display. This is done by setting the 'Port' option in the NextionDriver section of MMDVM.ini to 'modem'
[NextionDriver]
Port=modem
...
Yeah, I was reading the NextionDriver_ConvertConfig script, and it seems it turn on transparent mode if the [Nextion]::Port is not the /dev/ttyNextionDriver
Okay. So it's solved
Cheers.
---
Daniel
-
W1RHS
- Posts: 21
- Joined: Sat Nov 16, 2019 5:04 am
- Location: Cape Cod MA USA
-
Contact:
Post
by W1RHS » Mon Jan 20, 2020 5:48 pm
Yes, solved! Thanks for working with me on this!
-
F1RMB
- Posts: 2667
- Joined: Sat Nov 16, 2019 5:42 am
- Location: Grenoble, France
Post
by F1RMB » Mon Jan 20, 2020 6:03 pm
W1RHS wrote: ↑Mon Jan 20, 2020 5:48 pm
Yes, solved! Thanks for working with me on this!
-
OK2HAD
- Posts: 52
- Joined: Wed Jan 08, 2020 1:10 pm
- Location: Uherský Brod (Czech Republic)
Post
by OK2HAD » Tue Jan 21, 2020 10:48 am
Hi,
on my GD-77 still angry the sound in DMR (no sound coming out of the station) if I set Beep vol: lower than + 3db. The sound of the buttons is very strong to annoying on + 3db. It makes me constantly change the volume of the whole station. Some solution?
Thank you 73
-
F1RMB
- Posts: 2667
- Joined: Sat Nov 16, 2019 5:42 am
- Location: Grenoble, France
Post
by F1RMB » Tue Jan 21, 2020 10:55 am
Hi,
OK2HAD wrote: ↑Tue Jan 21, 2020 10:48 am
Hi,
on my GD-77 still angry the sound in DMR (no sound coming out of the station) if I set Beep vol: lower than + 3db. The sound of the buttons is very strong to annoying on + 3db. It makes me constantly change the volume of the whole station. Some solution?
Thank you 73
Roger have changed some code optimizations about sound. Maybe that will solve your problem with the next firmware release.
Cheers.
-
SQ7PTE
- Posts: 146
- Joined: Sat Nov 16, 2019 4:23 am
- Location: KO00to
-
Contact:
Post
by SQ7PTE » Tue Jan 21, 2020 11:27 am
Today is 21/01/2020 When can we expect a new version of Firmware (upgraded)?
-
F1RMB
- Posts: 2667
- Joined: Sat Nov 16, 2019 5:42 am
- Location: Grenoble, France
Post
by F1RMB » Tue Jan 21, 2020 11:50 am
SQ7PTE wrote: ↑Tue Jan 21, 2020 11:27 am
Today is 21/01/2020 When can we expect a new version of Firmware (upgraded)?
Soon
-
F1CXG
- Posts: 167
- Joined: Sat Nov 16, 2019 7:24 am
- Location: GRENOBLE (France)
Post
by F1CXG » Tue Jan 21, 2020 12:16 pm
Sure ?
-
SQ7PTE
- Posts: 146
- Joined: Sat Nov 16, 2019 4:23 am
- Location: KO00to
-
Contact:
Post
by SQ7PTE » Tue Jan 21, 2020 12:43 pm
I am happy at the thought
-
OK2HAD
- Posts: 52
- Joined: Wed Jan 08, 2020 1:10 pm
- Location: Uherský Brod (Czech Republic)
Post
by OK2HAD » Tue Jan 21, 2020 1:10 pm
F1RMB wrote: ↑Tue Jan 21, 2020 10:55 am
Hi,
OK2HAD wrote: ↑Tue Jan 21, 2020 10:48 am
Hi,
on my GD-77 still angry the sound in DMR (no sound coming out of the station) if I set Beep vol: lower than + 3db. The sound of the buttons is very strong to annoying on + 3db. It makes me constantly change the volume of the whole station. Some solution?
Thank you 73
Roger have changed some code optimizations about sound. Maybe that will solve your problem with the next firmware release.
Cheers.
Thank