Update 18th Jan

VK3KYY
Posts: 3192
Joined: Sat Nov 16, 2019 3:25 am
Location: Melbourne, Australia
Contact:

Re: Update 18th Jan

Post by VK3KYY » Sun Jan 19, 2020 10:19 am

BTW. I installed Daniels files on my PiStar 3.x and it works OK.

User avatar
m1dyp
Posts: 464
Joined: Sat Nov 16, 2019 8:03 am
Location: Hertfordshire, U.K.
Contact:

Re: Update 18th Jan

Post by m1dyp » Sun Jan 19, 2020 12:52 pm

all updated and working here, many thanks
Attachments
gd77 pi zero w.jpg
gd77 pi zero w.jpg (174.03 KiB) Viewed 896 times
Last edited by m1dyp on Sun Jan 19, 2020 11:43 pm, edited 1 time in total.
73 de Ken :D

User avatar
F1CXG
Posts: 166
Joined: Sat Nov 16, 2019 7:24 am
Location: GRENOBLE (France)

Re: Update 18th Jan

Post by F1CXG » Sun Jan 19, 2020 1:24 pm

Yes, it's full, you have to go through a hosting site ... :?

Image
73 de Thierry ;)

W1RHS
Posts: 12
Joined: Sat Nov 16, 2019 5:04 am
Location: Cape Cod MA USA
Contact:

Re: Update 18th Jan

Post by W1RHS » Mon Jan 20, 2020 2:24 am

Nice work Daniel. Thanks to you, Roger and the others for their updates. It makes this all a lot of fun!
-73
Rick, W1RHS

VK2CNN
Posts: 4
Joined: Tue Dec 03, 2019 11:16 pm

Re: Update 18th Jan

Post by VK2CNN » Mon Jan 20, 2020 3:46 am

Thank you everyone working on the improvement of firmware.
GD-77 can only get better with every update.
I am very excited!!!!
Geoff VK2CNN

W1RHS
Posts: 12
Joined: Sat Nov 16, 2019 5:04 am
Location: Cape Cod MA USA
Contact:

Re: Update 18th Jan

Post by W1RHS » Mon Jan 20, 2020 4:47 am

After installing Daniel's files everything seems to work fine. If I select CAST the GD77 displays as expected. If I return to my Nextion screen the live log displays a continuous stream of these:
W: 2020-01-20 04:44:40.369 Received a NAK from the MMDVM, command = 0x80, reason = 1

If I run the command to return to the stock files the behavior in the log continues.
-73
Rick, W1RHS

User avatar
F1RMB
Posts: 882
Joined: Sat Nov 16, 2019 5:42 am
Location: Grenoble, France
Contact:

Re: Update 18th Jan

Post by F1RMB » Mon Jan 20, 2020 5:54 am

W1RHS wrote:
Mon Jan 20, 2020 4:47 am
After installing Daniel's files everything seems to work fine. If I select CAST the GD77 displays as expected. If I return to my Nextion screen the live log displays a continuous stream of these:
W: 2020-01-20 04:44:40.369 Received a NAK from the MMDVM, command = 0x80, reason = 1

If I run the command to return to the stock files the behavior in the log continues.
Hi,

Serial passthrough (command 0x80, aka Nextion), isn't supported (you can't connect your nextion on the GD77 ;) ).
So, check if you selectect the right serial port in Pi-Star's configuration.

Cheers.
73 de Daniel.

HB3XPL
Posts: 11
Joined: Sat Nov 16, 2019 9:15 am

Re: Update 18th Jan

Post by HB3XPL » Mon Jan 20, 2020 7:04 am

Hello i installed this dash update but i get M1ABC callsign in the banner's how can i put in my own callsign ????
Thanks
Attachments
newDash.PNG
newDash.PNG (14.73 KiB) Viewed 869 times

User avatar
F1RMB
Posts: 882
Joined: Sat Nov 16, 2019 5:42 am
Location: Grenoble, France
Contact:

Re: Update 18th Jan

Post by F1RMB » Mon Jan 20, 2020 7:12 am

Hi,
HB3XPL wrote:
Mon Jan 20, 2020 7:04 am
Hello i installed this dash update but i get M1ABC callsign in the banner's how can i put in my own callsign ????
Thanks
You have to go in Configuration, and press "Apply Changes" button.
73 de Daniel.

User avatar
m1dyp
Posts: 464
Joined: Sat Nov 16, 2019 8:03 am
Location: Hertfordshire, U.K.
Contact:

Re: Update 18th Jan

Post by m1dyp » Mon Jan 20, 2020 7:12 am

click configuration, scroll to general setting and enter callsign, dmr id, freq location etc and apply changes

i noticed wifi defaults to JP i had to change mine to GB before it would find and connect
Last edited by m1dyp on Mon Jan 20, 2020 7:15 am, edited 1 time in total.
73 de Ken :D

Post Reply