Hotspot mode - Apparently stuck in TX
Re: Hotspot mode - Apparently stuck in TX
Thanks so much, it no longer locks up, but I do still get the random single repeated frame of DMR at some point after, this is a repeat of whatever the last TX'd frame was.
Re: Hotspot mode - Apparently stuck in TX
Ok, with Today's update with the change to remove the buffer. I now just get the old TG/PC show on the screen the repeated packet never gets sent to the Pi.
This is perfect! thanks so much everyone for fixing this.
For some reason when I put the old Tier 1 firmware on my hotspot is deaf, TX is fine so I've had to use the Tier 2 Firmware so I didn't really have a work around for this issue.
This is perfect! thanks so much everyone for fixing this.
For some reason when I put the old Tier 1 firmware on my hotspot is deaf, TX is fine so I've had to use the Tier 2 Firmware so I didn't really have a work around for this issue.
Re: Hotspot mode - Apparently stuck in TX
Okay. Expect some hotspot improvements soonM7OOL wrote: ↑Thu Jan 16, 2020 4:27 pmOk, with Today's update with the change to remove the buffer. I now just get the old TG/PC show on the screen the repeated packet never gets sent to the Pi.
This is perfect! thanks so much everyone for fixing this.
For some reason when I put the old Tier 1 firmware on my hotspot is deaf, TX is fine so I've had to use the Tier 2 Firmware so I didn't really have a work around for this issue.
Re: Hotspot mode - Apparently stuck in TX
Sadly it started doing the random frame again today. but it still doesn't lock up. I just remember to finish with a pc to something local that doesn't matter.
Still thank you so much!
Still thank you so much!
Re: Hotspot mode - Apparently stuck in TX
Hi Simon,
Cheers.
---
Daniel
Okay. I've added something to try to prevent that in the Hotspot code. To you want a test version ?
Cheers.
---
Daniel
Re: Hotspot mode - Apparently stuck in TX
Yes please! that would be very kind.
Re: Hotspot mode - Apparently stuck in TX
Thanks Daniel, I've installed that on both of my GDs
Edit, I just got a repeated frame, after running for just over 2 days.
Edit, I just got a repeated frame, after running for just over 2 days.
Re: Hotspot mode - Apparently stuck in TX
Hi,
- Try to reduce the output power,
- Use an external antenna,
- Put some ferrite beads around the data cable.
Cheers.
---
Daniel
Check the "dmesg" output, but I bet it's the same problem as usual, too much RF going back to the USB port:toybizarre wrote: ↑Sun May 24, 2020 9:00 amHello to all,
i have the same problem....
OpenGD77 last firmware
Raspberry pi 3 amd 1 (same problem) last pi-star
when i configure all.....and the radio go in TX....the end
Pi-star stuck in tx (Only pi-star)....the radio will only transmit for 1 second.
Same problem with raspbery 1 .... with or without the CAST option...
Any solution?
Thanks
- Try to reduce the output power,
- Use an external antenna,
- Put some ferrite beads around the data cable.
Cheers.
---
Daniel