Christmas update

EA5JN
Posts: 5
Joined: Sat Nov 16, 2019 10:48 pm

Re: Christmas update

Post by EA5JN » Wed Dec 25, 2019 5:11 pm

Many thanks again to the developers who do not stop improving for everyone even on this Christmas holiday.73

User avatar
W1AEX
Posts: 126
Joined: Sat Nov 16, 2019 9:00 pm
Location: Connecticut, USA
Contact:

Re: Christmas update

Post by W1AEX » Thu Dec 26, 2019 12:45 am

Wow!!! Roger, Daniel, Alex, and Colin, thanks very much for this amazing compilation of fixes and features!

Merry Christmas to you all and many wishes for a relaxing holiday!

73,

Rob W1AEX

User avatar
W0RMT
Posts: 178
Joined: Sat Nov 16, 2019 12:45 pm
Location: Louisville, CO USA

Re: Christmas update

Post by W0RMT » Thu Dec 26, 2019 1:54 am

Merry Christmas everyone! And especially to our devs Roger, Daniel, Colin, Alex. Great work, gentlemen!

F4HKA
Posts: 3
Joined: Sat Dec 21, 2019 10:56 am

Re: Christmas update

Post by F4HKA » Thu Dec 26, 2019 7:44 am

Hi there!
Thanks to all contributors for this great firmware!
Cheers

beeden
Posts: 6
Joined: Sun Dec 22, 2019 6:58 am

Re: Christmas update

Post by beeden » Thu Dec 26, 2019 1:34 pm

Dear Roger Clars, Merry Christmas and thanks for your work and firmware. Only thanks to her my walkie-talkie is functioning. The fact is that I was faced with the MD-760 model for the Chinese market, which was re-marked for GD-77, which led to major failures after updating the walkie-talkie firmware.
Only your firmware brought it back to life. Although I lack some functions as in my own, for example, a channel with two frequencies at once, and the ability to switch between them. Although it’s possible these are features of the firmware on my walkie-talkie. The side keys SK1, SK2 are also not functional
On the native firmware from GD-77, it becomes impossible to work with the walkie-talkie, there is no TX power and there is no sound in analog mode

VK3KYY
Posts: 7478
Joined: Sat Nov 16, 2019 3:25 am
Location: Melbourne, Australia

Re: Christmas update

Post by VK3KYY » Thu Dec 26, 2019 9:38 pm

beeden wrote:
Thu Dec 26, 2019 1:34 pm
The side keys SK1, SK2 are also not functional
On the native firmware from GD-77, it becomes impossible to work with the walkie-talkie, there is no TX power and there is no sound in analog mode
See the manual for the use of the Blue button

https://github.com/rogerclarkmelbourne/ ... 0Guide.pdf

SK1 and the number keys will have user definable functionality at some time in the future.

Dual Watch is not currently supported but the firmware can listen on both TimeSlots of a DRM repeater simultaneous.

Also if you make a zone with just 2 channels you can scan both scanners constantly

kk6knd
Posts: 3
Joined: Fri Dec 27, 2019 2:51 am

Re: Christmas update

Post by kk6knd » Fri Dec 27, 2019 2:53 am

Awesome update and thank you. Could you possibly post the code for the christmas boot melody and possibly others?

-KK6KND
Last edited by kk6knd on Fri Dec 27, 2019 3:06 am, edited 1 time in total.

User avatar
F1RMB
Posts: 2518
Joined: Sat Nov 16, 2019 5:42 am
Location: Grenoble, France

Re: Christmas update

Post by F1RMB » Fri Dec 27, 2019 3:00 am

Hi,
kk6knd wrote:
Fri Dec 27, 2019 2:53 am
Awesome update and thank you. Could you possibly post the code for the christmas boot melody and possibly others?

-KK6KND
Christmas one is available here.

Cheers.
---
Daniel

kk6knd
Posts: 3
Joined: Fri Dec 27, 2019 2:51 am

Re: Christmas update

Post by kk6knd » Fri Dec 27, 2019 3:10 am

Thank you for the link. literally, as you posted I found that exact link. thank you again.

-KK6KND

KP3AV
Posts: 4
Joined: Sat Dec 28, 2019 12:04 pm

Re: Christmas update

Post by KP3AV » Sat Dec 28, 2019 12:08 pm

The Best.... Thanks for all...

Post Reply