problem set location manually on west (on RD-5R)
problem set location manually on west (on RD-5R)
I can't manually set the location west of Greenwich (on RD-5R). For example set 58.4948°W. (I can't change from E to W)
YES I was able to configure the latitude south of the equator, without problems.
Firmware:
Mar 4 2023
efc2c8b D
Thanks in advance.
YES I was able to configure the latitude south of the equator, without problems.
Firmware:
Mar 4 2023
efc2c8b D
Thanks in advance.
Re: problem set location manually on west (on RD-5R)
E/W is selected the same way you select N/S, just hold the SK2 while you do it.
Re: problem set location manually on west (on RD-5R)
unfortunately, the same way to chang s/n on my radio not working to change e/w...
Thanks for your cooperation.
BR LU8ACH
Thanks for your cooperation.
BR LU8ACH
Re: problem set location manually on west (on RD-5R)
N/S is selected using the up and down arrows.
E/W is selected by holding SK2 (the lower side button) at the same time as pressing the up and down arrows.
I don't have an RD5R to check this, maybe someone else can check.
This should work an all radios. If it does not work on yours than you may have a fault with the side button. Does it work for other functions?
E/W is selected by holding SK2 (the lower side button) at the same time as pressing the up and down arrows.
I don't have an RD5R to check this, maybe someone else can check.
This should work an all radios. If it does not work on yours than you may have a fault with the side button. Does it work for other functions?
Re: problem set location manually on west (on RD-5R)
Hi,
Yes, it works (of course only when the location is currently in edition, I mean while entering the digits).
Cheers.
---
Daniel
Yes, it works (of course only when the location is currently in edition, I mean while entering the digits).
Cheers.
---
Daniel
Re: problem set location manually on west (on RD-5R)
Thanks Colin & Daniel!!!
Problem solve!!
BR
Alejandro
Problem solve!!
BR
Alejandro
Re: problem set location manually on west (on RD-5R)
step by step, with your help and that of some ham members, I am being able to enter the magical digital world.
Thank you very much to all!!!
Thank you very much to all!!!