OpenGD77 with BlueDV for Windows

User avatar
m1dyp
Posts: 601
Joined: Sat Nov 16, 2019 8:03 am
Location: Hertfordshire, U.K.
Contact:

Re: OpenGD77 with BlueDV for Windows

Post by m1dyp » Thu Dec 12, 2019 10:01 am

DO4CZ wrote:
Thu Dec 12, 2019 9:35 am


@ m1dyp
I use Win 10 1909 64bit and everything works (COM port)
If you can not fix the problem with the com port, the "BlueDV-9558-preBETA" is also great
http://software.pa7lim.nl/BlueDV/BETA/W ... reBETA.zip
thanks o will try that

User avatar
SQ7PTE
Posts: 146
Joined: Sat Nov 16, 2019 4:23 am
Location: KO00to
Contact:

Re: OpenGD77 with BlueDV for Windows

Post by SQ7PTE » Thu Dec 12, 2019 10:11 am

Works great.
Thank you very much.

User avatar
DU2XXR
Posts: 191
Joined: Thu Nov 28, 2019 5:25 am
Location: Philippines
Contact:

Re: OpenGD77 with BlueDV for Windows

Post by DU2XXR » Thu Dec 12, 2019 10:54 am

My bad. I plugged in the radio to the swr meter but the actual antenna cable was unplugged (I usually remove it as a lightning precaution).

As per my last check I was able to reach around 3Km at 3w with rolling terrain.

VK3KYY
Posts: 7473
Joined: Sat Nov 16, 2019 3:25 am
Location: Melbourne, Australia

Re: OpenGD77 with BlueDV for Windows

Post by VK3KYY » Thu Dec 12, 2019 11:02 am

4I1RAC wrote:
Thu Dec 12, 2019 10:54 am
My bad. I plugged in the radio to the swr meter but the actual antenna cable was unplugged (I usually remove it as a lightning precaution).

As per my last check I was able to reach around 3Km at 3w with rolling terrain.

(LOL)

User avatar
m1dyp
Posts: 601
Joined: Sat Nov 16, 2019 8:03 am
Location: Hertfordshire, U.K.
Contact:

Re: OpenGD77 with BlueDV for Windows

Post by m1dyp » Thu Dec 12, 2019 11:28 am

oops. yeah antenna helps lol. :mrgreen:

wish it was that simple with my com port.

never mind, at least I still have android and raspberry :D

User avatar
m1dyp
Posts: 601
Joined: Sat Nov 16, 2019 8:03 am
Location: Hertfordshire, U.K.
Contact:

Re: OpenGD77 with BlueDV for Windows

Post by m1dyp » Thu Dec 12, 2019 11:53 am

OMG

I found this on another forum (isnt google wonderful)

"response from David PA7LIM which was to "Please select an YSF reflector in the setup."

when I looked in settings, mine was blank, so I randomly chose one, saved it and hey presto.....
Attachments
dv2.jpg
dv2.jpg (220.08 KiB) Viewed 5292 times

DO4CZ
Posts: 63
Joined: Sat Nov 16, 2019 8:55 am
Location: near Rostock, Germany

Re: OpenGD77 with BlueDV for Windows

Post by DO4CZ » Thu Dec 12, 2019 12:36 pm

To adjust a YSF Reflector should not have a single foot in DMR.

YSF (Yaesu Fusion) has nothing to do with DMR, it should work that way.

Or did you activate Fusion?
With GD-77 we only need to switch on serial and DMR

I didn't do it, just set up and finished DMR.
Worked right away.

User avatar
m1dyp
Posts: 601
Joined: Sat Nov 16, 2019 8:03 am
Location: Hertfordshire, U.K.
Contact:

Re: OpenGD77 with BlueDV for Windows

Post by m1dyp » Thu Dec 12, 2019 12:51 pm

DO4CZ wrote:
Thu Dec 12, 2019 12:36 pm
To adjust a YSF Reflector should not have a single foot in DMR.

YSF (Yaesu Fusion) has nothing to do with DMR, it should work that way.

I didn't do it, just set up and finished DMR.
Worked right away.
yes it is strange I agree, but as soon as I did it the error message went and it worked

I cannot explain why, I can only report what happens :D

DO4CZ
Posts: 63
Joined: Sat Nov 16, 2019 8:55 am
Location: near Rostock, Germany

Re: OpenGD77 with BlueDV for Windows

Post by DO4CZ » Thu Dec 12, 2019 1:00 pm

Yes, ok, it was not like this ... ;)

User avatar
m1dyp
Posts: 601
Joined: Sat Nov 16, 2019 8:03 am
Location: Hertfordshire, U.K.
Contact:

Re: OpenGD77 with BlueDV for Windows

Post by m1dyp » Thu Dec 12, 2019 1:40 pm

m1dyp wrote:
Thu Dec 12, 2019 10:01 am
DO4CZ wrote:
Thu Dec 12, 2019 9:35 am


@ m1dyp
I use Win 10 1909 64bit and everything works (COM port)
If you can not fix the problem with the com port, the "BlueDV-9558-preBETA" is also great
http://software.pa7lim.nl/BlueDV/BETA/W ... reBETA.zip

that version works straight away :mrgreen:

Post Reply