New GD77 Beta - August 3 2022
New GD77 Beta - August 3 2022
There is a new GD77/DM1801/RD5R Beta version available
downloads/GD77/bca0d61bd5cc483853496e8bf0a4ee1b1d0e94bd
There were a few mistakes in the last Beta.
* The Channel mode , Reverse Repeater Lock function (Long press of #), had somehow been removed.
* The RD5R version was not fully updated in the last Beta because a problem prevented that version being compiled and I didn't notice that the binary had not been updated.
downloads/GD77/bca0d61bd5cc483853496e8bf0a4ee1b1d0e94bd
There were a few mistakes in the last Beta.
* The Channel mode , Reverse Repeater Lock function (Long press of #), had somehow been removed.
* The RD5R version was not fully updated in the last Beta because a problem prevented that version being compiled and I didn't notice that the binary had not been updated.
Re: New GD77 Beta - August 3 2022
Thanks a lot Roger!
73 best regards de Fabio IZ2EIB
73 best regards de Fabio IZ2EIB
Re: New GD77 Beta - August 3 2022
thank you
Re: New GD77 Beta - August 3 2022
Thanks
Seems to work great
Ron N7RDE
Seems to work great
Ron N7RDE
Re: New GD77 Beta - August 3 2022
Hi everyone, great work on these devices ....
I wanted to give you my opinion on this function that I describe:
Start conditions
Filter = off
(TS1-TS2 monitor)
Short press * changes TS1 / TS2 only for TX
Longh press * change Filter = on (monitor off)
Short press * change TS1 or TS2 fixes RX and TX
Longh press * change Filter = off
See if it is possible to insert it would be convenient for an easy and immediate use in the car etc ....
Regard
Thank you
73 Lorenzo
I wanted to give you my opinion on this function that I describe:
Start conditions
Filter = off
(TS1-TS2 monitor)
Short press * changes TS1 / TS2 only for TX
Longh press * change Filter = on (monitor off)
Short press * change TS1 or TS2 fixes RX and TX
Longh press * change Filter = off
See if it is possible to insert it would be convenient for an easy and immediate use in the car etc ....
Regard
Thank you
73 Lorenzo
Re: New GD77 Beta - August 3 2022
Changes to TS by pressing * are always to both Tx and Rx. Operating the radio where the Rx and Tx TS are different is totally non standard.I1KDO wrote: ↑Mon Aug 08, 2022 9:43 pmHi everyone, great work on these devices ....
I wanted to give you my opinion on this function that I describe:
Start conditions
Filter = off
(TS1-TS2 monitor)
Short press * changes TS1 / TS2 only for TX
Longh press * change Filter = on (monitor off)
Short press * change TS1 or TS2 fixes RX and TX
Longh press * change Filter = off
See if it is possible to insert it would be convenient for an easy and immediate use in the car etc ....
Regard
Thank you
73 Lorenzo
Your suggestion would remove fundamental functionality.
Re: New GD77 Beta - August 3 2022
HI Roger
sorry delete my post the question is not clear
my request its:
add "Long press * ability or disability Filter TS "
if it is possible
Tnx
73 Lorenz
sorry delete my post the question is not clear
my request its:
add "Long press * ability or disability Filter TS "
if it is possible
Tnx
73 Lorenz
Re: New GD77 Beta - August 3 2022
OK.
You mean,
Long press * in DMR mode to toggle TS filter
I think possibly long press * already has the function to disable the TS override
When you press * the TS is then locked and does not change, when you change channel, even if the channel has a different TS
E.g.
Channel A is TS 2
Channel B is TS 1
If you are on Channel A on TS2, Then press * to change to TS1, Then press * to change back to TS2
The radio is now set to manual override of TS, ( to TS 2)
Changing to Channel B , or any other channel, the radio stays on the override TS ( 2 in this case)
To clear the manual override of TS so that it follows the TS in the codeplug for each channel, you must use long press *
Re: New GD77 Beta - August 3 2022
When you press * the TS is then locked and does not change, when you change channel, even if the channel has a different TS, ......
in this function it is also possible to disable the Filter so that it is exclusively on the desired TS and no longer receives the other?
in this function it is also possible to disable the Filter so that it is exclusively on the desired TS and no longer receives the other?