DMR No Audio, when scanning with TS filtering disabled

[DF9HJ]

No audio on DMR after long period of scannig >10 Min with dual time slot receiption. although green top light illuminated, call signs or DMR ID are displayed in display.
FM receiption OK.
toggeling TS or to FM or pressing buttons, blue as well as keybord, did not help-
Rebooting cures temporarily.

[VK3KYY]

Just to confirm, you have TS filtering disabled and are using the Scan feature ?

[DF9HJ]

Correct

[VK3KYY]

Thanks

I'll leave my radio scanning and see what happens.

[DF9HJ]

Still same.
Was also in the versions between and on the actual.
On 3 of my 3 GD 77 only after scanning >> 10min with no TS filtrering.
w/o scan OK.

[DF9HJ]

TS filtering en/disabled makes no difference.
Bug also shows up without filtering.In my case with TS1 receiption

[VK3KYY]

I have tested this several times but I can’t replicate the problem.

[DF9HJ]

Maybe my codeplug in conjuction with the FW

[VK3KYY]

Maybe my codeplug in conjuction with the FW

I don't know. But the problem does seem unique to you

[DF9HJ]

HNY to all.

Problem still persits in al FW updates sine.
In OpenGD77-202001010900 I did found the following:
When the problem occours I transferred the channel to VFO did CC scan but the radio did not stop on the CC which in this case is CC1, eventhough the RSSI indicator was visible and the green LED illuminated.
After rebooting the GD-77 the CC scan stopped at the correct CC1.

73 Jens