-
F1RMB
- Posts: 2518
- Joined: Sat Nov 16, 2019 5:42 am
- Location: Grenoble, France
Post
by F1RMB » Thu Nov 05, 2020 3:28 pm
Hi,
Ik0nwg wrote: ↑Thu Nov 05, 2020 3:18 pm
simplex hotspot .... does it only with today's firmware version .... that of 3 works correctly
I just tried, and I don't have any problem.
Do you have any filtering enabled ?
Cheers.
---
Daniel
-
F1RMB
- Posts: 2518
- Joined: Sat Nov 16, 2019 5:42 am
- Location: Grenoble, France
Post
by F1RMB » Thu Nov 05, 2020 3:30 pm
Also, are you using a contact you've created for the PC 9990, or are you dialing from the keyboard ?
Cheers.
---
Daniel
-
Ik0nwg
- Posts: 242
- Joined: Sat Nov 16, 2019 7:23 am
- Location: JN61VG
-
Contact:
Post
by Ik0nwg » Thu Nov 05, 2020 3:39 pm
F1RMB wrote: ↑Thu Nov 05, 2020 3:30 pm
Also, are you using a contact you've created for the PC 9990, or are you dialing from the keyboard ?
Cheers.
---
Daniel
double # ...... PC 9990 with keyboard .... green key ..... PTT
--------------Here Forbach to you Grenoble ...... joke Daniel .... thanks---------------
-
EB3AM
- Posts: 204
- Joined: Fri Jan 24, 2020 1:40 pm
- Location: Catalonia, not Spain
-
Contact:
Post
by EB3AM » Thu Nov 05, 2020 3:51 pm
F1RMB wrote: ↑Thu Nov 05, 2020 3:19 pm
Hi,
EB3AM wrote: ↑Thu Nov 05, 2020 3:05 pm
I just upgrade to nov 5 firm.
I run for a 45 minutes in scan mode.
Batt. Full
Power setting -W+
USEr power 3000
No tx in any moment
Te radio are hot, really hot.
Pull out battery, and chassis IS about 50 degrees celsius or more.
Never before i note this
Scanning a Zone or "All Channels" ? In case of a Zone, DMR or FM only, a mix of both, how many channels ? (just to try to reproduce your conditions).
Cheers.
---
Daniel
Hi Daniel
All channels, mix of DMR and FM channels, about 100.
Also I remove TS filter. Color filter is enabled.
-
F1RMB
- Posts: 2518
- Joined: Sat Nov 16, 2019 5:42 am
- Location: Grenoble, France
Post
by F1RMB » Thu Nov 05, 2020 4:26 pm
Ik0nwg wrote: ↑Thu Nov 05, 2020 3:39 pm
F1RMB wrote: ↑Thu Nov 05, 2020 3:30 pm
Also, are you using a contact you've created for the PC 9990, or are you dialing from the keyboard ?
Cheers.
---
Daniel
double # ...... PC 9990 with keyboard .... green key ..... PTT
--------------Here Forbach to you Grenoble ...... joke Daniel .... thanks---------------
Okay, just like I do. Weird...
Cheers.
---
Daniel
-
F1RMB
- Posts: 2518
- Joined: Sat Nov 16, 2019 5:42 am
- Location: Grenoble, France
Post
by F1RMB » Thu Nov 05, 2020 4:27 pm
EB3AM wrote: ↑Thu Nov 05, 2020 3:51 pm
F1RMB wrote: ↑Thu Nov 05, 2020 3:19 pm
Hi,
EB3AM wrote: ↑Thu Nov 05, 2020 3:05 pm
I just upgrade to nov 5 firm.
I run for a 45 minutes in scan mode.
Batt. Full
Power setting -W+
USEr power 3000
No tx in any moment
Te radio are hot, really hot.
Pull out battery, and chassis IS about 50 degrees celsius or more.
Never before i note this
Scanning a Zone or "All Channels" ? In case of a Zone, DMR or FM only, a mix of both, how many channels ? (just to try to reproduce your conditions).
Cheers.
---
Daniel
Hi Daniel
All channels, mix of DMR and FM channels, about 100.
Also I remove TS filter. Color filter is enabled.
Okay. I will let it run in the same conditions.
Cheers.
---
Daniel
-
VK3KYY
- Posts: 7486
- Joined: Sat Nov 16, 2019 3:25 am
- Location: Melbourne, Australia
Post
by VK3KYY » Thu Nov 05, 2020 7:30 pm
EB3AM wrote: ↑Thu Nov 05, 2020 3:05 pm
I just upgrade to nov 5 firm.
I run for a 45 minutes in scan mode.
Batt. Full
Power setting -W+
USEr power 3000
No tx in any moment
Te radio are hot, really hot.
Pull out battery, and chassis IS about 50 degrees celsius or more.
Never before i note this
Does this happen if 5w is selected?
I had some similar problem a few days ago, but I could not repeat the problem
-
n1id
- Posts: 17
- Joined: Sat Nov 30, 2019 12:30 pm
Post
by n1id » Thu Nov 05, 2020 7:32 pm
I do not have parrot or disconnect work at all under nov 5 on 3-gd77's also i notice that the signal it receives from my hotspot was about half scale varying instead of full bar which it should be. Nov 3 works fine
-
VK3KYY
- Posts: 7486
- Joined: Sat Nov 16, 2019 3:25 am
- Location: Melbourne, Australia
Post
by VK3KYY » Thu Nov 05, 2020 7:34 pm
Ik0nwg wrote: ↑Thu Nov 05, 2020 3:18 pm
F1RMB wrote: ↑Thu Nov 05, 2020 3:15 pm
Hi,
Ik0nwg wrote: ↑Thu Nov 05, 2020 3:06 pm
Hi Daniel .... I can't hear my voice when it comes back from the BM server ... I see the return signal on the display but I can't hear the audio .... but if I move over a channel and then return to the my channel I start to hear the audio of my test
Okay, with a hotpot ? Duplex or Simplex ?
Cheers.
---
Daniel
simplex hotspot .... does it only with today's firmware version .... that of 3 works correctly
What power level is selected? User power or any power level e.g 1w
I will test on my duplex and ximolex hotspots
-
VK3KYY
- Posts: 7486
- Joined: Sat Nov 16, 2019 3:25 am
- Location: Melbourne, Australia
Post
by VK3KYY » Thu Nov 05, 2020 7:44 pm
n1id wrote: ↑Thu Nov 05, 2020 7:32 pm
I do not have parrot or disconnect work at all under nov 5 on 3-gd77's also i notice that the signal it receives from my hotspot was about half scale varying instead of full bar which it should be. Nov 3 works fine
OK.
I made some changes to DMR RSSI sample timing,
Is the signal strength correct if change to FM and listen to the hotspot?