Stop transmitting occasionally...

User avatar
F1RMB
Posts: 882
Joined: Sat Nov 16, 2019 5:42 am
Location: Grenoble, France
Contact:

Re: Stop transmitting occasionally...

Post by F1RMB » Sat Nov 21, 2020 12:32 pm

Hi Alfred,
oe7abh wrote:
Sat Nov 21, 2020 12:15 pm
Hi Daniel,

Yes !
With other firmware versions, I could always set all power levels before the Raspi start!

73 Alfred
Did you modified your MMDVMHost ini file (expert menu in Pi-Star), the RFLevel value ?


Cheers.
---
Daniel
73 de Daniel.

User avatar
oe7abh
Posts: 25
Joined: Mon Aug 24, 2020 7:19 am
Location: Zillertal AUSTRIA
Contact:

Re: Stop transmitting occasionally...

Post by oe7abh » Sat Nov 21, 2020 2:41 pm

Daniel,

In my MMDVM host ini file is set to "100"
I changed it to "10" -> result 500mW hotspot power! Ok.

In the past, I was able to set the TX power before the Raspi start!
Thanks Daniel !!

73 Alfred OE7ABH
http://members.chello.at/~abh/funk.htm

User avatar
F1RMB
Posts: 882
Joined: Sat Nov 16, 2019 5:42 am
Location: Grenoble, France
Contact:

Re: Stop transmitting occasionally...

Post by F1RMB » Sat Nov 21, 2020 2:55 pm

Hi Alfred,
oe7abh wrote:
Sat Nov 21, 2020 2:41 pm
Daniel,

In my MMDVM host ini file is set to "100"
I changed it to "10" -> result 500mW hotspot power! Ok.

In the past, I was able to set the TX power before the Raspi start!
Thanks Daniel !!

73 Alfred OE7ABH
http://members.chello.at/~abh/funk.htm

That never changed, IIRC. If the RFLevel is set to 100, it will use the master power level (the one you set using SK1 + Left/Right), any value below is a percentage of 5W.


Cheers.
---
Daniel
73 de Daniel.

User avatar
oe7abh
Posts: 25
Joined: Mon Aug 24, 2020 7:19 am
Location: Zillertal AUSTRIA
Contact:

Re: Stop transmitting occasionally...

Post by oe7abh » Sat Nov 21, 2020 5:24 pm

Thanks Daniel !!

Post Reply