I think the block is a hour . All sorted now . What mic did you use with the Raspberry PI 3b ?VK3KYY wrote: ↑Wed May 20, 2020 9:25 pmPossibly 24 hoursMM6NRK wrote: ↑Wed May 20, 2020 4:00 pmHow long do you get blocked for ?ea3ihi wrote: ↑Wed May 20, 2020 2:09 pmRelated to the md380-emu software, the one at this repository includes an option (-S) needed to run a udp socket server:
https://github.com/DVSwitch/md380tools/ ... r/emulator
Changing TG is like doing a PTT, so if you open multiple TGs in a short time period you can get blocked.
But if you change your station ID e.g. to 02 or 03 etc that normally gets around the block
Side project, "DMR Station" network radio
Re: Side project, "DMR Station" network radio
Re: Side project, "DMR Station" network radio
With the pi 3 I use a logitech usb headset with mic. With the dk2 (stm32mp157-dk2) wich is the one that I use most of the time, I use Samsung in-ear earphones from an old phone and they work great.
Re: Side project, "DMR Station" network radio
When you use usb head set ,do you need to install any drivers ?
Re: Side project, "DMR Station" network radio
I have tested with USB headsets and also a USB audio card (brand UGREEN) and both were detected as sound cards without installing any additional software.
Re: Side project, "DMR Station" network radio
Hi some times when i use ptt the sound is ok then other times it keys up with no sound .
Then some times my call sign comes up on network then un keys after a few secs , Is this a bug you have seen before ?
It might be my usb sound card so i have a new one comeing next week .
Then some times my call sign comes up on network then un keys after a few secs , Is this a bug you have seen before ?
It might be my usb sound card so i have a new one comeing next week .
Re: Side project, "DMR Station" network radio
DMRStation SW runs on a RPi4 with 3.5" LCD touchscreen and USB souncard. ( https://www.youtube.com/watch?v=ZlqMuv9Lb28 )
The SW runs on a RPi0 also but no sound.
The SW runs on a RPi0 also but no sound.
Re: Side project, "DMR Station" network radio
Nice!
If pulse audio can run in the pi 0zero there is no apparent reason not to have audio. I will try to get a pi zero for testing.
David
If pulse audio can run in the pi 0zero there is no apparent reason not to have audio. I will try to get a pi zero for testing.
David
Re: Side project, "DMR Station" network radio
I have sound and can hear other contacts . It the PTT sound on my pi3b that is not there at times . Other times i key up and it cuts of again afater 2 secs .TA2EI wrote: ↑Fri May 22, 2020 1:57 pmDMRStation SW runs on a RPi4 with 3.5" LCD touchscreen and USB souncard. ( https://www.youtube.com/watch?v=ZlqMuv9Lb28 )
The SW runs on a RPi0 also but no sound.
Re: Side project, "DMR Station" network radio
Hi david what do you make of this ?
This is a fresh install and it keeps cutting of like before .
pi@raspberrypi:/opt/DMRStation $ DISPLAY=:0 ./start.sh
** (DMRstation:1023): WARNING **: Error retrieving accessibility bus address: or g.freedesktop.DBus.Error.ServiceUnknown: The name org.a11y.Bus was not provided by any .service files
Sending auth
Send config
Connected
DMR status 1
DMR status 1
DMR status 1
Assertion 's' failed at pulse/stream.c:1483, function pa_stream_write_ext_free() . Aborting.
Aborted
This is a fresh install and it keeps cutting of like before .
pi@raspberrypi:/opt/DMRStation $ DISPLAY=:0 ./start.sh
** (DMRstation:1023): WARNING **: Error retrieving accessibility bus address: or g.freedesktop.DBus.Error.ServiceUnknown: The name org.a11y.Bus was not provided by any .service files
Sending auth
Send config
Connected
DMR status 1
DMR status 1
DMR status 1
Assertion 's' failed at pulse/stream.c:1483, function pa_stream_write_ext_free() . Aborting.
Aborted
Re: Side project, "DMR Station" network radio
Ok i got this fixed by doing this .
WARNING **: Error retrieving accessibility bus address: org.freedesktop.DBus.Error.ServiceUnknown: The name org.a11y.Bus was not provided by any .service files
to solve I installed 'at-spi2-core'
Code: Select all
sudo apt-get install at-spi2-core
i found the answer in this thread https://github.com/NixOS/nixpkgs/issues/16327
And Re: Installing Pulse Audio .
WARNING **: Error retrieving accessibility bus address: org.freedesktop.DBus.Error.ServiceUnknown: The name org.a11y.Bus was not provided by any .service files
to solve I installed 'at-spi2-core'
Code: Select all
sudo apt-get install at-spi2-core
i found the answer in this thread https://github.com/NixOS/nixpkgs/issues/16327
And Re: Installing Pulse Audio .