Problems Open dm1801

Post Reply
Lurive01

Problems Open dm1801

Post by Lurive01 » Sat May 09, 2020 11:04 pm

Hi. I have a problem, I have installed the modified fw for the baofeng 1801, in the radius it works perfect, but the modified cps for the new fw does not detect the radius at the time of reading and writing it, be it an existing modified codeplug or the one created in the same cps. What may be happening? Thank you.

AL7AK
Posts: 20
Joined: Sat May 09, 2020 1:46 pm

Re: Problems Open dm1801

Post by AL7AK » Sat May 09, 2020 11:18 pm

Pardon me if I am not understanding your question. I assume the word "radius" was mistranslated when it should be "radio".

When you installed the GD77 CPS software in windows, if the USB driver was not installed correctly Windows will not be able to connect to the radio and hence the GD77 CPS software will not write a codeplug to the radio.

I had to run the GD77 CPS install programm in Windows "Run as Administrator" to be able to get the USB driver to install correctly.

It took a number of times to get it to install correctly. You can tell if you are successful if Windows tells you that your device was installed correctly and ready to use.

If you then connect the DM-1801 to the computer USB it should make a musical tone mean the radio was regonized by Windows.

Cheers
AL7AK
Mike Kelly
Hayward, WI USA

Lurive01

Re: Problems Open dm1801

Post by Lurive01 » Sun May 10, 2020 12:17 am

Thanks for the reply. The cable seems to be fine because with that we performed the upgrade, but when reading or writing the information from the cps to the radio, the cps does not detect it. The version of the fw for the openDM-1801, is the one released on 03-05-2020. Where could I download those drivers?

Lurive01

Re: Problems Open dm1801

Post by Lurive01 » Sun May 10, 2020 12:18 am

Thanks for the reply. The cable seems to be fine because with that we performed the upgrade, but when reading or writing the information from the cps to the radio, the cps does not detect it. The version of the fw for the openDM-1801, is the one released on 03-05-2020. Where could I download those drivers?

The cps is the modified!

VK3KYY
Posts: 7490
Joined: Sat Nov 16, 2019 3:25 am
Location: Melbourne, Australia

Re: Problems Open dm1801

Post by VK3KYY » Sun May 10, 2020 6:01 am

Which CPS are you using. (Post a link )

AL7AK
Posts: 20
Joined: Sat May 09, 2020 1:46 pm

Re: Problems Open dm1801

Post by AL7AK » Sun May 10, 2020 4:22 pm

The USB drivers are part of the CPS install.

Post Reply