Page 4 of 4
Re: Talker Alias note
Posted: Wed Jan 08, 2020 9:03 am
by IK8JHL
VK3KYY wrote: ↑Wed Jan 08, 2020 8:50 am
Did you test the OpenGD77 TA Tx ---> 878 on simplex ?
I only tested from OpenGD77 ----> OpenGD77 which is not an ideal test.
BTW. I have now tested on DMR MARC using Motorola DR3000 and IPSC but it didnt work correctly, there were lots of problems with audio breakup
Only from 878 (and578) to GD77
This test :
https://www.opengd77.com/viewtopic.php? ... t=10#p3523
how do I send the TA with the GD-77,
If you ask in HotSpot mode , yes attached Picture
Re: Talker Alias note
Posted: Wed Jan 08, 2020 9:38 am
by VK3KYY
Use the version I posted
https://www.opengd77.com/viewtopic.php? ... 3579#p3572
In Options, enable "TA Tx"
Text that is sent is Line1 + Line2 from the Boot Item screen (the boot screen text)
Re: Talker Alias note
Posted: Wed Jan 08, 2020 10:20 am
by IK8JHL
Sorry now I saw it, it reads but there is no space between call and name
Re: Talker Alias note
Posted: Wed Jan 08, 2020 10:28 am
by VK3KYY
You will need to add a space at the end of the callsign on the line1 text, because people may want to put their callsign and name on line1 and span across to line2 - hence I can't insert a space between the line1 and line2 text.
I think in the CPS, I will need to add a view for the TA text which shows what line1+line2 looks like
Re: Talker Alias note
Posted: Wed Jan 08, 2020 10:29 am
by IK8JHL
OK Roger Its perfect , leave it like this, just enter a space
Re: Talker Alias note
Posted: Wed Jan 08, 2020 10:38 am
by VK3KYY
OK.
When I get time I will update the CPS to show the TA text.
I will put this feature into the master version of the firmware in the next release
Re: Talker Alias note
Posted: Wed Jan 08, 2020 10:44 am
by m1dyp
nice addition, i missed the initial post thanks all
Re: Talker Alias note
Posted: Wed Jan 08, 2020 10:51 am
by IK8JHL
VK3KYY wrote: ↑Wed Jan 08, 2020 10:38 am
OK.
When I get time I will update the CPS to show the TA text.
I will put this feature into the master version of the firmware in the next release
Great job Roger, well done