Page 15 of 16
Re: NA7Q - Unofficial Firmware Build [9/20][GD-77]
Posted: Thu Sep 24, 2020 2:37 am
by NA7Q
Double Tap Orange for Channel/VFO Mode Scan is fixed.
https://github.com/na7q/OpenGD77/raw/ma ... .75.20.sgl
Re: NA7Q - Unofficial Firmware Build [9/20][GD-77]
Posted: Thu Sep 24, 2020 6:03 am
by DF9HJ
Awesome,thanks
Sorry could have tried VFO mode but I don't use it therefore it dosen't come into my mind....
Re: NA7Q - Unofficial Firmware Build [9/23][GD-77]
Posted: Sat Sep 26, 2020 9:15 pm
by NA7Q
Pectus666 wrote: ↑Sat Sep 26, 2020 6:57 pm
In your search you have 126 to 128 in it. I have also tested it down to cb radio. Was that intention of yours?
I'll assume you mean the search range? If so, that would be from programming on your end of how you've used the radio.
After you select the ranges you want, it'll stay on that every time between VFO A and B.
If something else, please tell me more. Thanks.
Re: NA7Q - Unofficial Firmware Build [9/23][GD-77]
Posted: Sun Sep 27, 2020 9:16 pm
by NA7Q
Added support for other radios. RD5R builds have not been tested. If you use it, feel free to drop a comment.
1801 builds are confirmed working.
DM1801
https://github.com/na7q/OpenGD77/raw/ma ... .77.20.sgl
GD77
https://github.com/na7q/OpenGD77/raw/ma ... .77.20.sgl
RD5R
https://github.com/na7q/OpenGD77/raw/ma ... .77.20.sgl
Re: NA7Q - Unofficial Firmware Build [9/27][GD-77][DM-1801][RD-5R]
Posted: Mon Sep 28, 2020 12:41 am
by NA7Q
Pectus666 wrote: ↑Sun Sep 27, 2020 10:11 pm
446,103125 Hi you can not enter it. How can you use the new functions in cps?
I don't know of a single radio that can do a step like that. Commercial, ham, anything. You guys use weird splits over there.
Though if you set the radio to a "6.25" step and put it 446.10313 it will go right to it. Though I don't know if this is exactly on frequency or not. You'll know if you try to use it, or if someone else chimes in.
As for the CPS. It won't accept this because it's not a standard step.
Re: NA7Q - Unofficial Firmware Build [9/27][GD-77][DM-1801][RD-5R]
Posted: Mon Sep 28, 2020 9:52 am
by LY1RF
gd77 wil not decode FDMA as it's TDMA radio ...
Re: NA7Q - Unofficial Firmware Build [9/27][GD-77][DM-1801][RD-5R]
Posted: Mon Sep 28, 2020 9:58 am
by G4EML
Those frequencies are used by DPMR radios. The GD77 is a DMR radio and cannot receive or transmit DPMR. So there is no point in having the frequencies in a codeplug.
Re: NA7Q - Unofficial Firmware Build [9/27][GD-77][DM-1801][RD-5R]
Posted: Mon Sep 28, 2020 11:57 am
by NA7Q
Thanks for clearing it up guys.
Re: NA7Q - Unofficial Firmware Build [9/23][GD-77]
Posted: Mon Sep 28, 2020 8:48 pm
by W9YA
"Great Stuff" Mike....mny tnxs om !
es vy 73 de "baab" w9ya
Re: NA7Q - Unofficial Firmware Build [9/27][GD-77][DM-1801][RD-5R]
Posted: Tue Sep 29, 2020 3:47 pm
by S53H
Hello,
I trye the last software version 1.77.20 on Radioditty GD-77 and also on Baufeng DM-1801. On GD77 I can change the Power levels include 0,1mW; 0,3mW; 0,5mW; 1mW; 5mW; 10mW; 25mW; 50mW; 75mW; 100mW; 250mW; 500mW; 750mW; 1W; 2W; 3W; 4W; 5W and 5W++
On Baufeng DM-1801 with tha same version I can change the Power levelsn 50mW; 75mW; 100mW; 250mW; 500mW; 750mW; 1W; 2W; 3W; 4W; 5W and 5W++.
I would like to set the same power level also on Baufeng DM1801. It is something spetial to do?
Thank You and best regards,
73 de S53H