Added in the menu map, and wrote descriptions in the new items under "Options".
What's "Filter Time" by the way?
I made a pull request.
Not yet finished, as I have to update screen captures (might take time).
Documentation and user guide
Re: Documentation and user guide
Filter time is the time which the Time Slot is captured for.
E.g.
If you disable TS filtering, and there is no signal the radio will be listening on both TS 1 and TS 2.
As soon as a signal is detected on either TS e.g. TS 2, the radio will lock on (aka capture) that TS and stay on that TS until there has been no activity on that timeslot for the "Filter time" value.
I initially had this hard coded to 5 seconds, but found the some people left very long pauses between transmissions, and if the pause / gap between their transmissions was more than 5 seconds, the radio would go back to listening on both TS and if there was traffic on the other TS, it would start receiving that TS instead of the one it was previously receiving on.
So I made this into a setting that people could change themselves, and also set the default value to 10 seconds, as this seems a reasonably length of time.
E.g.
If you disable TS filtering, and there is no signal the radio will be listening on both TS 1 and TS 2.
As soon as a signal is detected on either TS e.g. TS 2, the radio will lock on (aka capture) that TS and stay on that TS until there has been no activity on that timeslot for the "Filter time" value.
I initially had this hard coded to 5 seconds, but found the some people left very long pauses between transmissions, and if the pause / gap between their transmissions was more than 5 seconds, the radio would go back to listening on both TS and if there was traffic on the other TS, it would start receiving that TS instead of the one it was previously receiving on.
So I made this into a setting that people could change themselves, and also set the default value to 10 seconds, as this seems a reasonably length of time.
Re: Documentation and user guide
Thanks
I'll pull and merge soon.
I'll pull and merge soon.
Re: Documentation and user guide
Hi,
Please find attached a missing function for "BLUE + #" I came across on the updated keys-and-buttons.png
.
Please find attached a missing function for "BLUE + #" I came across on the updated keys-and-buttons.png
.
- keys-and-buttons_2.png (360.6 KiB) Viewed 4270 times
Re: Documentation and user guide
Updated in page 1 of "Off Topic / Keys & buttons" 
Re: Documentation and user guide
About the <BLUE>-#, maybe it would be better to describe it as "GC/PC Lists"
Cheers.
Cheers.
Re: Documentation and user guide
Awesome. Thanks, Angelo! I will look at it later today after Roger merges.