CPS modifications
CPS modifications
I've made some modifications to the CPS because there is a lot of confusion about the "Digital Contact" on the Channel screen and also the Download Contacts screen
1. I've decided to remove the Download Contacts screen, because it was a legacy screen used to support the official firmware, which could not display callsigns with names using their DMR ID system
I know some people suggested that some sort of warning should be shown rather than removing the screen, but this wasn't practical, and no one has been able to show be a use-case for when anyone would want to populate the Digital Contacts with hundreds of Private Calls.
2. I've changed the Channel screen, so that it sets the Digital Contact to "N/A" if the TG List is set to anything except "None".
Because with the firmware, if a TG List is assigned to a channel, it will be used instead of the "Digital Contact"
You can still change the Digital Contact to another value after the screen loads, but every time you goto that channel again, it will get changed back to "N/A" unless you set the TG List to "None"
3. I've renamed the "DMR ID" menu to "Download callsign database", because this is probably easier to understand
This experimental version can be downloaded from this link
https://drive.google.com/file/d/1snV322 ... sp=sharing
1. I've decided to remove the Download Contacts screen, because it was a legacy screen used to support the official firmware, which could not display callsigns with names using their DMR ID system
I know some people suggested that some sort of warning should be shown rather than removing the screen, but this wasn't practical, and no one has been able to show be a use-case for when anyone would want to populate the Digital Contacts with hundreds of Private Calls.
2. I've changed the Channel screen, so that it sets the Digital Contact to "N/A" if the TG List is set to anything except "None".
Because with the firmware, if a TG List is assigned to a channel, it will be used instead of the "Digital Contact"
You can still change the Digital Contact to another value after the screen loads, but every time you goto that channel again, it will get changed back to "N/A" unless you set the TG List to "None"
3. I've renamed the "DMR ID" menu to "Download callsign database", because this is probably easier to understand
This experimental version can be downloaded from this link
https://drive.google.com/file/d/1snV322 ... sp=sharing
Re: CPS modifications
thanks tested seems to work correctly
Re: CPS modifications
now in all my channel zone contact list n/a
Unable to attach screenshot (image too large)
Unable to attach screenshot (image too large)
Re: CPS modifications
Installed CPS ... everything looks OK for now
ciao Roger
ciao Roger
Re: CPS modifications
Hi Roger,
Installed and tested some functions - no problems.
I will post a updated translation (german.xml) later.
Installed and tested some functions - no problems.
I will post a updated translation (german.xml) later.