Using the Sept 2020 version with a DVMEGA HOTSPOT on a GD77 radio.
I have set the SOUNDS:DMR:BOTH, but not getting any audible beeps on start/stop of received activity with my HOTSPOT.
All other aspects seem to work OK.
The radio is NOT in SILENT mode, as I hear key beeps and startup morse code, and I'm Not using Audible Voice Prompts.
Any IDEAS?
I'm new to OPENGD77, and learning as I become more acquainted with the GREAT software/firmware provided by the TEAM - THANKS.
DMR Start / Stop Beeps
Re: DMR Start / Stop Beeps
Hi,
The Start beep will be audible when you transmit, and the Stop one when you release the PTT button.
You won't hear any beep on RX.
In DMR duplex configuration, the Start beep will be heard once the HT is "synchronized" to the repeater/hotspot.
In simplex, the Start beep is played immediately the PTT button is pressed.
Cheers.
---
Daniel
The Start beep will be audible when you transmit, and the Stop one when you release the PTT button.
You won't hear any beep on RX.
In DMR duplex configuration, the Start beep will be heard once the HT is "synchronized" to the repeater/hotspot.
In simplex, the Start beep is played immediately the PTT button is pressed.
Cheers.
---
Daniel