OpenGD77

Wonderful firmware - thanks. Getting into the nuances of the operation.
To get to Last Heard Screen via green button takes either 9 or 5 key presses. (up or down)

The manual says PTT and black key combo takes you there too.

But it doesn't for me. Tried both black then PTT and PTT then black. In both cases it returns to the main screen.

But I can't believe you need to key up (PTT) for this screen. Is that correct? I want to get there without keying up and was hoping for a fast key to get there.

What have I missed?
Alan

What manual are you reading?

Try FN(blue)+3

https://github.com/rogerclarkmelbourne/ ... r_Guide.md
https://github.com/jangelor/OpenGD77/wi ... ation-ToDo

OK thanks
I was reading this one:
https://github.com/rogerclarkmelbourne/ ... last-heard

at this bookmark the diagram still says PTT and black
https://github.com/rogerclarkmelbourne/ ... nd-buttons

Hi,

vk2fmet wrote: ↑

Wed Jul 08, 2020 3:55 pm

OK thanks
I was reading this one:
https://github.com/rogerclarkmelbourne/ ... last-heard

at this bookmark the diagram still says PTT and black
https://github.com/rogerclarkmelbourne/ ... nd-buttons

PTT + SK1 is for access to LH when you're xmitting.
While you're listening, SK2 + 3 is direct access to last heard.

Cheers.
---
Daniel

ok thanks - so when I have PTT latch set and xmitting (i.e. not holding PTT), does the SK1 jump to last heard?

vk2fmet wrote: ↑

Wed Jul 08, 2020 4:35 pm

ok thanks - so when I have PTT latch set and xmitting (i.e. not holding PTT), does the SK1 jump to last heard?

Yes.

Cheers.
---
Daniel