Changing channels with different Rx group lists

OK1TE
Posts: 43
Joined: Tue Sep 29, 2020 7:58 am

Re: Changing channels with different Rx group lists

Post by OK1TE » Wed Jan 13, 2021 6:22 am

VK3KYY wrote:
Tue Jan 12, 2021 10:11 pm
I have codeplugs for different networks, (BM DMR MARC etc), and if the same TG is available on both networks e.g. TG9, TG 505 are both OK for both networks, then I arrange my codeplugs so that those 2 TG's are in the same position in the different TG lists, so that even if I change channel to one which has a different TG list, then the TG remains the same.

Everyone has their own way of building a codeplug, there isn't a single "correct way" to build a codeplug.
I absolutely didn't want to force the only correct way to build a codeplug. I just couldn't imagine resetting the index when the contact changes among lists on the same index would break someone's smart design.

BTW my proposal works for your case. If the contact on the selected index is the same (TG9) it's still used. I was suggesting a reset only for cases when the contacts don't match.

Post Reply