Beep when TX on / RX off

Post Reply
User avatar
EA5SW
Posts: 59
Joined: Sat Nov 16, 2019 9:45 am
Location: Valencia, Spain
Contact:

Beep when TX on / RX off

Post by EA5SW » Sat Feb 15, 2020 7:26 am

It's possible add a tone in the Speaker when you push the PTT at start or end ??

Some times if you have the HT in the belt, and a external mic, its possible push the PTT in an error and don't sure if you are in TX or not...

Only a beep in the Speaker that tell you that the PTT are pressed.

Some models have a beep tone in TX and tone when RX is over (MD380,TYT2017, etc.)
Jose - EA5SW - Valencia

User avatar
EA5SW
Posts: 59
Joined: Sat Nov 16, 2019 9:45 am
Location: Valencia, Spain
Contact:

Re: Beep when TX on / RX off

Post by EA5SW » Sat Feb 15, 2020 8:10 am

Some as this mod that i made...
Attachments
OpenGD77-EA5SW_TXBeep_150220.sgl
(477.06 KiB) Downloaded 27 times
Jose - EA5SW - Valencia

User avatar
Ik0nwg
Posts: 146
Joined: Sat Nov 16, 2019 7:23 am
Location: JN61VG

Re: Beep when TX on / RX off

Post by Ik0nwg » Sat Feb 15, 2020 11:31 am

perfect, you can also enter a final reception tone? thanks Jose
Sal
Sal jn61vg Italy

User avatar
EA5SW
Posts: 59
Joined: Sat Nov 16, 2019 9:45 am
Location: Valencia, Spain
Contact:

Re: Beep when TX on / RX off

Post by EA5SW » Sun Feb 16, 2020 12:43 am

This one have a PTT press tone and PTT release tone.
Also 100 Hz and 1Khz steps
Attachments
OpenGD77-EA5SW_TXBeep2_150220.sgl
(477.06 KiB) Downloaded 31 times
Jose - EA5SW - Valencia

User avatar
Ik0nwg
Posts: 146
Joined: Sat Nov 16, 2019 7:23 am
Location: JN61VG

Re: Beep when TX on / RX off

Post by Ik0nwg » Sun Feb 16, 2020 6:04 am

thanks Jose
Sal
Sal jn61vg Italy

User avatar
EA5SW
Posts: 59
Joined: Sat Nov 16, 2019 9:45 am
Location: Valencia, Spain
Contact:

Re: Beep when TX on / RX off

Post by EA5SW » Fri Feb 21, 2020 8:45 pm

Jose - EA5SW - Valencia

Post Reply