[RESOLVED] RT3S Callsign Database Information not displayed
[RESOLVED] RT3S Callsign Database Information not displayed
I did not file this in the bugs section as it may not be a bug & I just screwed something up!
I flashed the 20230915 firmware to a recently acquired RT3S (non-GPS, CPU identifies as "STM"). I then flashed the codeplug of my existing UV380 (GPS, CPU identifies as "TYT", same firmware revision) to the RT3S, then downloaded the entire DMR callsign/ID database from RadioID.net with 16-char length to the RT3S (just as I had done with my UV380). Both radios seem to be essentially identically configured for the Brandmeister network via a local hotspot, and seem to behave identically except for the issue below:
On the UV380, when someone makes a call, the contents of their DMR ID (first name, last name, location) are displayed below their callsign. On the RT3S, this does not occur, and the much more limited Brandmeister-provided string is displayed instead. I have tried re-flashing the ID database to the radio with no improvement. I have even set the display order to DB/Ct/TA.
What could be the cause & what could I try to resolve this?
EDIT: I have now flashed 20231212 and re-flashed the callsign database, no improvement.
I flashed the 20230915 firmware to a recently acquired RT3S (non-GPS, CPU identifies as "STM"). I then flashed the codeplug of my existing UV380 (GPS, CPU identifies as "TYT", same firmware revision) to the RT3S, then downloaded the entire DMR callsign/ID database from RadioID.net with 16-char length to the RT3S (just as I had done with my UV380). Both radios seem to be essentially identically configured for the Brandmeister network via a local hotspot, and seem to behave identically except for the issue below:
On the UV380, when someone makes a call, the contents of their DMR ID (first name, last name, location) are displayed below their callsign. On the RT3S, this does not occur, and the much more limited Brandmeister-provided string is displayed instead. I have tried re-flashing the ID database to the radio with no improvement. I have even set the display order to DB/Ct/TA.
What could be the cause & what could I try to resolve this?
EDIT: I have now flashed 20231212 and re-flashed the callsign database, no improvement.
Last edited by VA3VPN on Sun Dec 17, 2023 6:02 pm, edited 1 time in total.
Re: RT3S Callsign Database Information not displayed
I am having the same issue. Going to try and download the db with the allowable characters set to max.
Re: RT3S Callsign Database Information not displayed
I've just tested downloading from RadioID.net for the 505 region with the number of characters set to the maximum and it works fine
You need to provide more information about what you did
i.e where did you download the data from e.g. RadioID.net, how many records did the CPS download, how many records did you upload to the radio, did you download all regions or just your local region (not sure what the region could would be for VA)
Re: RT3S Callsign Database Information not displayed
How to you flash the DMR Id database (you have to flash at once the countries you're interested in, or the full world, and not one after the other, as it will erase the previous uploaded IDs).
Also, set the number of character to max value, as the STM32 based transceivers have enough space for this.
I suggest you to change the "Display Options" -> "Contact" to "Auto", or at least "2 Lines" (see https://github.com/LibreDMR/OpenGD77_Us ... md#contact)
Also, set the number of character to max value, as the STM32 based transceivers have enough space for this.
I suggest you to change the "Display Options" -> "Contact" to "Auto", or at least "2 Lines" (see https://github.com/LibreDMR/OpenGD77_Us ... md#contact)
Re: RT3S Callsign Database Information not displayed
Fixed. Maxing out the allowable letters worked.
Re: RT3S Callsign Database Information not displayed
Please explain
It doesn't matter what number of letters you set. It will still display something. however if you only allow 6 or 7 characters you will onlt see the callsign.
This thread seemed to imply that the calsign database was not working, but that is untrue.
Re: RT3S Callsign Database Information not displayed
Would you relax. This thread was not about the database, it was about what the Retevis RT3S was displaying from the database. When you limit the characters or use the 16 char default, the radio will just display the first 16 characters which were basically the callsign and the first name. The database was dowloaded with all the correct contact info as per the checked filter boxes.
Re: RT3S Callsign Database Information not displayed
Errrr, title says "RT3S Callsign Database Information not displayed", and according to the opening post, it's detailed that RT3S was not working like the other radio, despite the same settings.VA7LBA wrote: ↑Sat Dec 16, 2023 6:48 amWould you relax. This thread was not about the database, it was about what the Retevis RT3S was displaying from the database. When you limit the characters or use the 16 char default, the radio will just display the first 16 characters which were basically the callsign and the first name. The database was dowloaded with all the correct contact info as per the checked filter boxes.
So, instead of being rude, as it's a PEBCAK, I would you suggest to make amends.
Thanks.
Re: RT3S Callsign Database Information not displayed
In my case I downloaded all records by leaving the region field blank, the CPS pulled ~250k records, all seemed to be successfully uploaded. This was done in a single flash. I did the exact same steps when uploading to my UV380. Both were set to a 16-char limit.
Display Options->Contact was/is "2 Lines" on both radios.
I have now tried it again by leaving both the region and data record length fields blank. Total IDs is 250515 from a max of 342864. Flashing this took a considerably longer time but completed without issue. This seems to have resolved it, thank you all for your assistance!!
Display Options->Contact was/is "2 Lines" on both radios.
I have now tried it again by leaving both the region and data record length fields blank. Total IDs is 250515 from a max of 342864. Flashing this took a considerably longer time but completed without issue. This seems to have resolved it, thank you all for your assistance!!