Page 1 of 2

Complete Italian Codeplug all Repeaters, TG's and Cluster

Posted: Mon Dec 02, 2019 8:26 am
by IU4LEG
Full italian codeplug with all repeaters of all Network, all TG's and Cluster made by IU4LEG.

Re: Complete Italian Codeplug all Repeaters, TG's and Cluster

Posted: Mon Dec 02, 2019 9:32 am
by VK3KYY
Channels

DMR-ITALIA , DMR+, IR2UGN , IT-DMR , IR0DV (and perhaps others) have no TG and no Rx Group.

They will default to TG 9, but it would be better if it was assigned an RX Group or a primary contact TG

Re: Complete Italian Codeplug all Repeaters, TG's and Cluster

Posted: Mon Dec 02, 2019 11:48 am
by IU4LEG
VK3KYY wrote:
Mon Dec 02, 2019 9:32 am
Channels

DMR-ITALIA , DMR+, IR2UGN , IT-DMR , IR0DV (and perhaps others) have no TG and no Rx Group.

They will default to TG 9, but it would be better if it was assigned an RX Group or a primary contact TG
the card BM, DMR-ITALIA, IT-DMR, DMR + in the channel list are empty, I only put them to separate the channels by type of network.
I left the local tg9 on all channels in TS2 by default because it is convenient as a starting point. Users can change the tg when they want by pressing blue + ###.
As for the RX lists, I probably forgot to put them on some channels, by mistake. Obviously users can customize it as they wish.
I took almost 2 months to create this codeplug, but obviously it can be improved. :-) :-)

thank you for your observation, I will try to improve it

Re: Complete Italian Codeplug all Repeaters, TG's and Cluster

Posted: Mon Dec 02, 2019 7:55 pm
by VK3KYY
Ok.

I just wanted to make sure that people did not have any problems

Updating the Rx group should be enough to fix it

Re: Complete Italian Codeplug all Repeaters, TG's and Cluster

Posted: Tue Dec 03, 2019 7:38 pm
by IU4LEG
ok, I'll make the change in the next few days when I have some time available ;-)

Re: Complete Italian Codeplug all Repeaters, TG's and Cluster

Posted: Tue Dec 03, 2019 9:26 pm
by VK3KYY
I know how difficult it is.

VK7ZCR and I are trying to make an all Australia codeplug, and even after many hours it still has a lot of problems ;-(

Re: Complete Italian Codeplug all Repeaters, TG's and Cluster

Posted: Sat Dec 07, 2019 3:28 pm
by IU4LEG
version 2.0 of the Italian codeplug modified for the new CPS. I have also entered the reception list for each channel and set the appropriate time slot for each TG and Cluster.
73 of IU4LEG

Re: Complete Italian Codeplug all Repeaters, TG's and Cluster

Posted: Sun Dec 08, 2019 7:45 pm
by IZ2EIB
Thank you very much Fabio!

73 best regards de Fabio IZ2EIB

Re: Complete Italian Codeplug all Repeaters, TG's and Cluster

Posted: Thu Dec 12, 2019 4:54 pm
by IU4LEG
IZ2EIB wrote:
Sun Dec 08, 2019 7:45 pm
Thank you very much Fabio!

73 best regards de Fabio IZ2EIB
Thank you too Fabio for the support.
Have a good evening,
73

Re: Complete Italian Codeplug all Repeaters, TG's and Cluster

Posted: Tue Feb 18, 2020 6:37 pm
by IU5MGQ
My actual CPS, a bit similar to yours. Less neat than your.
Feel free to suggest improvements!