Complete Italian Codeplug all Repeaters, TG's and Cluster

Post your OpenGD77 codeplugs here
User avatar
IU4LEG
Posts: 173
Joined: Wed Nov 20, 2019 12:49 pm

Complete Italian Codeplug all Repeaters, TG's and Cluster

Post by IU4LEG » Mon Dec 02, 2019 8:26 am

Full italian codeplug with all repeaters of all Network, all TG's and Cluster made by IU4LEG.
Attachments
codeplug opengd77 PUBBLICO.dat
(128 KiB) Downloaded 185 times

VK3KYY
Posts: 2996
Joined: Sat Nov 16, 2019 3:25 am
Location: Melbourne, Australia
Contact:

Re: Complete Italian Codeplug all Repeaters, TG's and Cluster

Post by VK3KYY » Mon Dec 02, 2019 9:32 am

Channels

DMR-ITALIA , DMR+, IR2UGN , IT-DMR , IR0DV (and perhaps others) have no TG and no Rx Group.

They will default to TG 9, but it would be better if it was assigned an RX Group or a primary contact TG

User avatar
IU4LEG
Posts: 173
Joined: Wed Nov 20, 2019 12:49 pm

Re: Complete Italian Codeplug all Repeaters, TG's and Cluster

Post by IU4LEG » Mon Dec 02, 2019 11:48 am

VK3KYY wrote:
Mon Dec 02, 2019 9:32 am
Channels

DMR-ITALIA , DMR+, IR2UGN , IT-DMR , IR0DV (and perhaps others) have no TG and no Rx Group.

They will default to TG 9, but it would be better if it was assigned an RX Group or a primary contact TG
the card BM, DMR-ITALIA, IT-DMR, DMR + in the channel list are empty, I only put them to separate the channels by type of network.
I left the local tg9 on all channels in TS2 by default because it is convenient as a starting point. Users can change the tg when they want by pressing blue + ###.
As for the RX lists, I probably forgot to put them on some channels, by mistake. Obviously users can customize it as they wish.
I took almost 2 months to create this codeplug, but obviously it can be improved. :-) :-)

thank you for your observation, I will try to improve it

VK3KYY
Posts: 2996
Joined: Sat Nov 16, 2019 3:25 am
Location: Melbourne, Australia
Contact:

Re: Complete Italian Codeplug all Repeaters, TG's and Cluster

Post by VK3KYY » Mon Dec 02, 2019 7:55 pm

Ok.

I just wanted to make sure that people did not have any problems

Updating the Rx group should be enough to fix it

User avatar
IU4LEG
Posts: 173
Joined: Wed Nov 20, 2019 12:49 pm

Re: Complete Italian Codeplug all Repeaters, TG's and Cluster

Post by IU4LEG » Tue Dec 03, 2019 7:38 pm

ok, I'll make the change in the next few days when I have some time available ;-)

VK3KYY
Posts: 2996
Joined: Sat Nov 16, 2019 3:25 am
Location: Melbourne, Australia
Contact:

Re: Complete Italian Codeplug all Repeaters, TG's and Cluster

Post by VK3KYY » Tue Dec 03, 2019 9:26 pm

I know how difficult it is.

VK7ZCR and I are trying to make an all Australia codeplug, and even after many hours it still has a lot of problems ;-(

User avatar
IU4LEG
Posts: 173
Joined: Wed Nov 20, 2019 12:49 pm

Re: Complete Italian Codeplug all Repeaters, TG's and Cluster

Post by IU4LEG » Sat Dec 07, 2019 3:28 pm

version 2.0 of the Italian codeplug modified for the new CPS. I have also entered the reception list for each channel and set the appropriate time slot for each TG and Cluster.
73 of IU4LEG
Attachments
codeplug opengd77 V2 PUBLIC ITA FULL.g77
(128 KiB) Downloaded 153 times

IZ2EIB
Posts: 72
Joined: Sat Nov 30, 2019 12:55 pm

Re: Complete Italian Codeplug all Repeaters, TG's and Cluster

Post by IZ2EIB » Sun Dec 08, 2019 7:45 pm

Thank you very much Fabio!

73 best regards de Fabio IZ2EIB

User avatar
IU4LEG
Posts: 173
Joined: Wed Nov 20, 2019 12:49 pm

Re: Complete Italian Codeplug all Repeaters, TG's and Cluster

Post by IU4LEG » Thu Dec 12, 2019 4:54 pm

IZ2EIB wrote:
Sun Dec 08, 2019 7:45 pm
Thank you very much Fabio!

73 best regards de Fabio IZ2EIB
Thank you too Fabio for the support.
Have a good evening,
73

IU5MGQ
Posts: 6
Joined: Tue Feb 18, 2020 6:06 pm

Re: Complete Italian Codeplug all Repeaters, TG's and Cluster

Post by IU5MGQ » Tue Feb 18, 2020 6:37 pm

My actual CPS, a bit similar to yours. Less neat than your.
Feel free to suggest improvements!
Attachments
CPS IU5MGQ - 20200218 V2.3beta2.g77
(128 KiB) Downloaded 72 times

Post Reply