Page 1 of 1

Australian CB and Marine VHF

Posted: Mon Dec 02, 2019 3:49 am
by VK3KYY
OK.

I made the mistake of setting the codeplug data type to ".dat" whereas on PHPBB I should have omitted the "." and just set the extension type to "dat"

BTW. I think with the new CPS I may change the default codeplug extension to .g77 as the CPS already supports both .dat and .g77 and it would make sense to the new codeplugs with 80 channels per zone to have a different extension

I've also changed the BBS settings to allow CSV files as downloadable attachments

People may not be aware but the my CPS has the ability to Append a CSV rather than replace, and it automatically creates the Zone if necessary

These 2 CSV's can be imported if you are using the experimental 80 channels per zone CPS


This is the exe for the new CPS, but it needs to be copied to the same folder as the normal CPS and you'll need to make your own shortcut to it.
(and you need to fix the Zones when you first run it as it doesnt update the zone format yet)

https://drive.google.com/open?id=1aLN5j ... Qz8xS8a4nc