Test post

Post your OpenGD77 codeplugs here
Post Reply
VK3KYY
Posts: 1652
Joined: Sat Nov 16, 2019 3:25 am
Location: Melbourne, Australia
Contact:

Test post

Post by VK3KYY » Mon Dec 02, 2019 1:52 am

This is just a test post of an empty codeplug to confirm .dat files are accepted
Attachments
empty.dat
(128 KiB) Downloaded 28 times

User avatar
VK6NJP
Posts: 13
Joined: Sat Nov 16, 2019 9:12 am
Location: Bullsbrook, Western Australia

Re: Test post

Post by VK6NJP » Mon Dec 02, 2019 3:12 am

Works good, thank you Roger

VK3KYY
Posts: 1652
Joined: Sat Nov 16, 2019 3:25 am
Location: Melbourne, Australia
Contact:

Re: Test post

Post by VK3KYY » Mon Dec 02, 2019 3:49 am

OK.

I made the mistake of setting the codeplug data type to ".dat" whereas on PHPBB I should have omitted the "." and just set the extension type to "dat"

BTW. I think with the new CPS I may change the default codeplug extension to .g77 as the CPS already supports both .dat and .g77 and it would make sense to the new codeplugs with 80 channels per zone to have a different extension

I've also changed the BBS settings to allow CSV files as downloadable attachments

People may not be aware but the my CPS has the ability to Append a CSV rather than replace, and it automatically creates the Zone if necessary

These 2 CSV's can be imported if you are using the experimental 80 channels per zone CPS


This is the exe for the new CPS, but it needs to be copied to the same folder as the normal CPS and you'll need to make your own shortcut to it.
(and you need to fix the Zones when you first run it as it doesnt update the zone format yet)

https://drive.google.com/open?id=1aLN5j ... Qz8xS8a4nc
Attachments
Australian_UHF_CB.csv
(11.15 KiB) Downloaded 26 times
Marine.csv
(8.94 KiB) Downloaded 27 times

User avatar
m1dyp
Posts: 333
Joined: Sat Nov 16, 2019 8:03 am
Location: Hertfordshire, U.K.

Re: Test post

Post by m1dyp » Mon Dec 02, 2019 5:38 am

is this a newer cps. it seems the same :o
73 de Ken :D

Post Reply