Voice prompts

G0NHF
Posts: 46
Joined: Sun Jan 19, 2020 10:28 am

Re: Voice prompts

Post by G0NHF » Sat Jun 27, 2020 12:10 am

VK3KYY wrote:
Thu Jun 25, 2020 11:01 pm
I logged 2 new issues on Github for the bugs raised in the last few comments

https://github.com/rogerclarkmelbourne/OpenGD77/issues
Can you add this problem Roger....

When in L3 mode, if I go to VFO and it’s in FM mode, the squelch is open and white noise is present, even if the squelch is set full... Well that’s what’s happening here tonight. Maybe you could check and see if you can replicate.

Tony

VK3KYY
Posts: 7475
Joined: Sat Nov 16, 2019 3:25 am
Location: Melbourne, Australia

Re: Voice prompts

Post by VK3KYY » Sat Jun 27, 2020 5:42 am

G0NHF wrote:
Sat Jun 27, 2020 12:10 am
VK3KYY wrote:
Thu Jun 25, 2020 11:01 pm
I logged 2 new issues on Github for the bugs raised in the last few comments

https://github.com/rogerclarkmelbourne/OpenGD77/issues
Can you add this problem Roger....

When in L3 mode, if I go to VFO and it’s in FM mode, the squelch is open and white noise is present, even if the squelch is set full... Well that’s what’s happening here tonight. Maybe you could check and see if you can replicate.

Tony
Hi Tony

I can't replicate that problem with the squelch on FM at all. Not on the VFO or Channel screens. Perhaps someone else can confirm if it happens for them

G0NHF
Posts: 46
Joined: Sun Jan 19, 2020 10:28 am

Re: Voice prompts

Post by G0NHF » Sat Jun 27, 2020 7:30 am

VK3KYY wrote:
Sat Jun 27, 2020 5:42 am
G0NHF wrote:
Sat Jun 27, 2020 12:10 am
VK3KYY wrote:
Thu Jun 25, 2020 11:01 pm
I logged 2 new issues on Github for the bugs raised in the last few comments

https://github.com/rogerclarkmelbourne/OpenGD77/issues
Can you add this problem Roger....

When in L3 mode, if I go to VFO and it’s in FM mode, the squelch is open and white noise is present, even if the squelch is set full... Well that’s what’s happening here tonight. Maybe you could check and see if you can replicate.

Tony
Hi Tony

I can't replicate that problem with the squelch on FM at all. Not on the VFO or Channel screens. Perhaps someone else can confirm if it happens for them
Thanks Roger,

I will test a bit more and with another radio.

Tony

G0NHF
Posts: 46
Joined: Sun Jan 19, 2020 10:28 am

Re: Voice prompts

Post by G0NHF » Sat Jul 04, 2020 9:13 am

G0NHF wrote:
Sat Jun 27, 2020 7:30 am
VK3KYY wrote:
Sat Jun 27, 2020 5:42 am
G0NHF wrote:
Sat Jun 27, 2020 12:10 am


Can you add this problem Roger....

When in L3 mode, if I go to VFO and it’s in FM mode, the squelch is open and white noise is present, even if the squelch is set full... Well that’s what’s happening here tonight. Maybe you could check and see if you can replicate.

Tony
Hi Tony

I can't replicate that problem with the squelch on FM at all. Not on the VFO or Channel screens. Perhaps someone else can confirm if it happens for them
Thanks Roger,

I will test a bit more and with another radio.

Tony
It would still be nice to stop the Max Headroom effect when moving up and down the channels and groups with the arrow keys in L3 mode. It needs a small delay before the voice announcements start, enough time to navigate without hear Cha Cha Cha Cha. All looking good otherwise. Testing again this weekend using unstable version date 28 June.

Thanks
Tony

DJ0HF
Posts: 34
Joined: Sun Nov 17, 2019 2:37 pm

Re: Voice prompts

Post by DJ0HF » Sat Jul 04, 2020 4:59 pm

I can get this to happen if the VFO is set as a digital channel and the star key press has been used to go to FM mode. If you then move the squelch to zero in the option menu it doesn't open the squelch and it is still at the old value probably 45%. It doesn't happen if you have the VFO set properly as an Analog channel. A number of blind ham users have tripped up on this one.

Ian
DJ0HF/G3ULO

DJ0HF
Posts: 34
Joined: Sun Nov 17, 2019 2:37 pm

Re: Voice prompts

Post by DJ0HF » Sat Jul 04, 2020 5:16 pm

DJ0HF wrote:
Sat Jul 04, 2020 4:59 pm
I can get this to happen if the VFO is set as a digital channel and the star key press has been used to go to FM mode. If you then move the squelch to zero in the option menu it doesn't open the squelch and it is still at the old value probably 45%. It doesn't happen if you have the VFO set properly as an Analog channel. A number of blind ham users have tripped up on this one.

Ian
DJ0HF/G3ULO
I think this is the same effect as Tony sees just with different starting values for the squelch. Probably worth checking whether the VFO channel is configured as a digital or analog channe in the CPSl.

Ian
DJ0HF/G3ULO

OM8AMV
Posts: 75
Joined: Thu Jun 25, 2020 7:26 pm

Re: Voice prompts

Post by OM8AMV » Fri Jul 10, 2020 8:55 pm

How upload bin file with OPENGD77 CPS ??

VK3KYY
Posts: 7475
Joined: Sat Nov 16, 2019 3:25 am
Location: Melbourne, Australia

Re: Voice prompts

Post by VK3KYY » Fri Jul 10, 2020 10:20 pm

OM8AMV wrote:
Fri Jul 10, 2020 8:55 pm
How upload bin file with OPENGD77 CPS ??
Files are now VPL format

Update your CPS if the Voice prompts button is not on the OpenGD77 Support screen

OM8AMV
Posts: 75
Joined: Thu Jun 25, 2020 7:26 pm

Re: Voice prompts

Post by OM8AMV » Sat Jul 11, 2020 7:34 am

VPL but on page is bin format.

VK3KYY
Posts: 7475
Joined: Sat Nov 16, 2019 3:25 am
Location: Melbourne, Australia

Re: Voice prompts

Post by VK3KYY » Sat Jul 11, 2020 7:41 am


Post Reply